TYPE GC
2Pages

Type H I Type G I Type TI Type S I Type SAI Type E I Type Butterfly I Type XXL I Type GC I Frame Umbrella spokes are made of rectangular aluminium sections of 40x20x2 mm. The mast is made of a round aluminium section of 80x3 mm in diameter. The top plate and the crown are made with U-profiles out of aluminium to house the struts. The aluminium telescope has section dimensions of 70x3 mm. All parts are screwed together and the frame is powder coated (Polyester powder ca. 80 p). _ White RAL 9010 (standard) _ Black RAL 9005 _ Silver RAL 9006 Mechanics The gearbox and the spindle are contained in the centre pole and can be operated by handle or using a motor. Ground Construction Made up of multiple segments 2x1 m large. All segments are of none rusting galvanized steel. The adaptor is hinged to allow easy lower or raising of umbrella. Composition The Gastro concept consists of a Type T parasol along with flooring and side walls. Cover The cover is made up of individual segments which are screwed to the frame by Sterling Steel hooks at the top and by rust-proof screws at the ends of the spokes. The cover is replaceable and is fade, light and water resistant. It is designed to withstand all weather conditions and can be ordered with valances or winter valances. MDT-tex® 260 FR (100% polyester dual-sided acrylic coating). Mass ca. 260 g/m2, water column pressure over 2000 mm, flame retardant up to DIN U102-B1, California T-19. MDT-tex119 680 (PVC material for optimal weather protection). Mass ca. 680 g/m2. Print _ Digital print _ Screen print _ Dispersion dye print Advantages _ Opened and closed by hand, or alternatively using an electric motor _ All materials are resistant to the effects of water corrosion _ All materials are screwed together and can be replaced easily. _ Telescopic pole allows the umbrella to open and close above table height _ Mechanics include a telescopic pole which allows the umbrella to open or close over the table _ Maintenance-free gear box _ Possible with foldable lights and heating _ High wind stability through the joint connection of the umbrella arms and side walls (Only possible with full length side walls) Accessories .Various lighting possibilities _ Transport case _ Protective sleeve with a telescopic pole _ MDT Flex-Bar _ Wind sheltering side walls available in different heights _ Gas or electric heater _ Speakers _ Electric motor to open and close the umbrella in combination with a wind watcher _ Multiple umbrellas can be connected with a rain junction (Available only with valances) _ Internal cabling (within the mast) MDT-tex premium products for long-lasting outdoor enjoyment Membranes & Structures

Type H I Type G I Type TI Type S I Type SAI Type E I Type Butterfly I Type XXL I Type GC I Dimensions of closed umbrella MDT-tex* www.mdt-tex.com Membranes & Structures