Exhibit with us
*myarchiexpo  
English
  1. Catalogs
  2. MBCI
  3. Craftsman Series
video corpo
cad

Craftsman Series

Craftsman Series
1 / 76 PagesView full catalog

Craftsman Series

Product catalog summary
General Overview: The document provides comprehensive design and installation guidelines for the Craftsman™ roofing system, focusing on small, large, and high batten profiles. It emphasizes adherence to the latest specifications and guidelines, which may change without notice, and the importance of consulting project-specific erection drawings.
Specifications: Craftsman™ panels are available in 12" and 16½" coverage widths with a minimum slope requirement of 3:12. Panels are made from Galvalume® and come in standard 24 gauge, with options for 22 and 26 gauge. Coatings include Signature® 200, Signature® 300, and Signature® 300 Metallic. The panels use concealed fastening systems like SB, LB, and HB Clips.
Installation Guidelines: Proper alignment of the substructure is crucial to avoid panel distortion. Recommended substructures include plywood, lightweight concrete, metal decking, or OSB, all engineered to meet design loads. Panels are water-shedding and require installation over a waterproofed substructure. The document advises against restricting thermal expansion and contraction.
UL 90 Requirements: Specific construction requirements for UL 90 rated roofs include using 24 gauge or heavier metal panels, clips spaced at a maximum of 2'-0" o.c., and specific fasteners. Detailed instructions are provided for installations over plywood and metal decks.
Product Checklist: Includes components and fasteners like SB-12, SB-16.5 panels, offset and continuous cleats, and fasteners such as pancake head screws and pop rivets.
Important Notices: Users are advised to read the manual thoroughly before installation and inspect all panels and accessories for quality. Contact information for MBCI locations is provided for further assistance.
Installation Details:
  • Offset Cleat Installation: Guidelines for installing gutters, cleats, and sealing batten ends, with restrictions for snow loads over 10 PSF.
  • Gutter with Drip Edge: Installation instructions for gutters suitable for roof slopes up to 4:12.
  • Parapet Details: Instructions for installing parapet high side eave flash and peak caps.
  • Miscellaneous Details: Guidelines for roof transitions, slope changes, and rigid board insulation over metal decks.
Standards and Recommendations: The document references standards like SMACNA, AISC, AISI, UL, and ASTM for quality assurance. It includes guidelines for pre-order checks, jobsite storage, handling, and application checklists.
Manufacturer and Installer Qualifications: Manufacturers must have at least three years of experience, and installers must be certified by the manufacturer. A third-party consultant must approve installation drawings and inspect the installation.
System Performance Requirements: The metal roof system must meet uplift resistance, design pressures, and air infiltration and water penetration standards.
Submittals: Required documents include shop drawings, performance tests, engineering calculations, samples, warranties, and certifications.
Fabrication Specifications: Materials must be tension leveled before roll forming, and panels should be roll-formed in continuous lengths where possible.
Prefabricated Components: Specifications for curbs and roof jacks, including material requirements and installation guidelines.
Execution: Installation must ensure weathertightness and allow for expansion and contraction, following manufacturer’s instructions and shop drawings.
Cleaning and Protection: Guidelines for disposing of excess materials, cleaning, and protecting the work until final acceptance.
Disclaimer: MBCI disclaims warranties on non-MBCI products and reserves the right to change specifications without notice.
See more

Catalog excerpts

Craftsman Series-1

Metal Roof and Wall Systems Design/Installation Information

 Open the catalog to page 1
Craftsman Series-2

IMPORTANT NOTICE READ THIS MANUAL COMPLETELY PRIOR TO BEGINNING THE INSTALLATION OF THE CRAFTSMAN SERIES PANELS. IF THERE IS CONFLICT BETWEEN PROJECT ERECTION DRAWINGS PROVIDED OR APPROVED BY MBCI AND DETAILS IN THIS MANUAL, PROJECT ERECTION DRAWINGS WILL TAKE PRECEDENCE. ALWAYS INSPECT EACH AND EVERY PANEL AND ALL ACCESSORIES BEFORE INSTALLATION. NEVER INSTALL ANY PRODUCT IF ITS QUALITY IS IN QUESTION. NOTIFY MBCI IMMEDIATELY IF ANY PRODUCT IS BELIEVED TO BE OUT OF TOLERANCE OR HAS BEEN DAMAGED DURING SHIPMENT. ©Copyright NCI Group, Inc. All Rights Reserved. 11-2011 The Engineering data contained...

 Open the catalog to page 2
Craftsman Series-3

Houston, TX 877/713-6224 Adel, GA 888/446-6224 Atlanta, GA 877/512-6224 Atwater, CA 800/829-9324 Dallas, TX 800/653-6224 Indianapolis, IN 800/735-6224 Jackson, MS 800/622-4136 Lubbock, TX 800/758-6224 Memphis, TN 800/206-6224 Oklahoma City, OK 800/597-6224 Omaha, NE 800/458-6224 Phoenix, AZ 888/533-6224 Richmond, VA 800/729-6224 Rome, NY 800/559-6224 Salt Lake City, UT 800/874-2404 San Antonio, TX 800/598-6224 TABLE OF CONTENTS SMALL BATTEN General Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

 Open the catalog to page 3
Craftsman Series-4

Jackson, MS 800/622-4136 Lubbock, TX 800/758-6224 Memphis, TN 800/206-6224 Oklahoma City, OK 800/597-6224 Omaha, NE 800/458-6224 Phoenix, AZ 888/533-6224 Houston, TX 877/713-6224 Adel, GA 888/446-6224 Atlanta, GA 877/512-6224 Atwater, CA 800/829-9324 Dallas, TX 800/653-6224 Indianapolis, IN 800/735-6224 ROOFING SYSTEM Richmond, VA 800/729-6224 Rome, NY 800/559-6224 Salt Lake City, UT 800/874-2404 San Antonio, TX 800/598-6224 Craftsman™ GENERAL DESCRIPTION CRAFTSMAN™ SMALL BATTEN PROFILES 12" COVERAGE 16½" COVERAGE 12" ⅜" 1" 16½" ⅜" SB12 1" SB16.5 Coverage Widths - 12" and 16½" Minimum Slope -...

 Open the catalog to page 4
Craftsman Series-5

Houston, TX 877/713-6224 Adel, GA 888/446-6224 Atlanta, GA 877/512-6224 Atwater, CA 800/829-9324 Dallas, TX 800/653-6224 Indianapolis, IN 800/735-6224 Jackson, MS 800/622-4136 Lubbock, TX 800/758-6224 Memphis, TN 800/206-6224 Oklahoma City, OK 800/597-6224 Omaha, NE 800/458-6224 Phoenix, AZ 888/533-6224 Richmond, VA 800/729-6224 Rome, NY 800/559-6224 Salt Lake City, UT 800/874-2404 San Antonio, TX 800/598-6224 PRODUCT INFORMATION ROOFING SYSTEM Craftsman™ ARCHITECT/ENGINEER INFORMATION 1. Use a properly aligned and uniform substructure to avoid panel distortion. Typical substructures-plywood...

 Open the catalog to page 5
Craftsman Series-6

Houston, TX 877/713-6224 Adel, GA 888/446-6224 Atlanta, GA 877/512-6224 Atwater, CA 800/829-9324 Dallas, TX 800/653-6224 Indianapolis, IN 800/735-6224 Jackson, MS 800/622-4136 Lubbock, TX 800/758-6224 Memphis, TN 800/206-6224 Oklahoma City, OK 800/597-6224 Omaha, NE 800/458-6224 Phoenix, AZ 888/533-6224 PRODUCT INFORMATION Richmond, VA 800/729-6224 Rome, NY 800/559-6224 Salt Lake City, UT 800/874-2404 San Antonio, TX 800/598-6224 Craftsman™ UL 90 REQUIREMENTS Construction #280 SB Over Plywood Deck 1. Metal Panels - 24 gauge or heavier - 12" or 16½" wide, continuous over two or more spans. 2....

 Open the catalog to page 6
Craftsman Series-7

Jackson, MS 800/622-4136 Lubbock, TX 800/758-6224 Memphis, TN 800/206-6224 Oklahoma City, OK 800/597-6224 Omaha, NE 800/458-6224 Phoenix, AZ 888/533-6224 Houston, TX 877/713-6224 Adel, GA 888/446-6224 Atlanta, GA 877/512-6224 Atwater, CA 800/829-9324 Dallas, TX 800/653-6224 Indianapolis, IN 800/735-6224 Richmond, VA 800/729-6224 Rome, NY 800/559-6224 Salt Lake City, UT 800/874-2404 San Antonio, TX 800/598-6224 Craftsman™ ENGINEERING PRODUCT INFORMATION PRODUCT CHECKLIST 12" ¾" SB-12 16½" SB Clip With Mastic SB Batten With Mastic SB Panel q ¾" SB -16.5 q q Vent Material Fasteners q q Vent Drip...

 Open the catalog to page 7
Craftsman Series-8

Jackson, MS 800/622-4136 Lubbock, TX 800/758-6224 Memphis, TN 800/206-6224 Oklahoma City, OK 800/597-6224 Omaha, NE 800/458-6224 Phoenix, AZ 888/533-6224 Houston, TX 877/713-6224 Adel, GA 888/446-6224 Atlanta, GA 877/512-6224 Atwater, CA 800/829-9324 Dallas, TX 800/653-6224 Indianapolis, IN 800/735-6224 PRODUCTION INFORMATION SPECIFICATIONS Richmond, VA 800/729-6224 Rome, NY 800/559-6224 Salt Lake City, UT 800/874-2404 San Antonio, TX 800/598-6224 Craftsman™ PRODUCT CHECKLIST Rake Trim “Z” Closure 3" COLOR ⅝ " 135° 1" q 1" “C” Closure 1⅛" SB -16.5 3" q 3" q SPECIFY ANGLE " 23 45° q 45° ½ " ⅝"...

 Open the catalog to page 8
Craftsman Series-9

Houston, TX 877/713-6224 Adel, GA 888/446-6224 Atlanta, GA 877/512-6224 Atwater, CA 800/829-9324 Dallas, TX 800/653-6224 Indianapolis, IN 800/735-6224 Jackson, MS 800/622-4136 Lubbock, TX 800/758-6224 Memphis, TN 800/206-6224 Oklahoma City, OK 800/597-6224 Omaha, NE 800/458-6224 Phoenix, AZ 888/533-6224 Craftsman™ Richmond, VA 800/729-6224 Rome, NY 800/559-6224 Salt Lake City, UT 800/874-2404 San Antonio, TX 800/598-6224 PRODUCT INFORMATION TYPICAL DETAILS PANEL FACTORY APPLIED MASTIC SB BATTEN SB PANEL WATERPROOF MEMBRANE SUBSTRUCTURE SB CLIP PANCAKE HEAD FASTENER INSTALLED PANEL CROSS SECTION...

 Open the catalog to page 9
Craftsman Series-10

Houston, TX 877/713-6224 Adel, GA 888/446-6224 Atlanta, GA 877/512-6224 Atwater, CA 800/829-9324 Dallas, TX 800/653-6224 Indianapolis, IN 800/735-6224 Jackson, MS 800/622-4136 Lubbock, TX 800/758-6224 Memphis, TN 800/206-6224 Oklahoma City, OK 800/597-6224 Omaha, NE 800/458-6224 Phoenix, AZ 888/533-6224 PRODUCT INFORMATION Richmond, VA 800/729-6224 Rome, NY 800/559-6224 Salt Lake City, UT 800/874-2404 San Antonio, TX 800/598-6224 Craftsman™ TYPICAL DETAILS ENDLAP BATTEN CAP COUPLER SB CLIP WATERPROOF MEMBRANE 4" SB PANEL PANCAKE HEAD FASTENER SB BATTEN SUBSTRUCTURE OFFSET CLEAT DOUBLE BEAD TAPE...

 Open the catalog to page 10
Craftsman Series-11

Jackson, MS 800/622-4136 Lubbock, TX 800/758-6224 Memphis, TN 800/206-6224 Oklahoma City, OK 800/597-6224 Omaha, NE 800/458-6224 Phoenix, AZ 888/533-6224 Houston, TX 877/713-6224 Adel, GA 888/446-6224 Atlanta, GA 877/512-6224 Atwater, CA 800/829-9324 Dallas, TX 800/653-6224 Indianapolis, IN 800/735-6224 Richmond, VA 800/729-6224 Rome, NY 800/559-6224 Salt Lake City, UT 800/874-2404 San Antonio, TX 800/598-6224 PRODUCT INFORMATION Craftsman™ TYPICAL DETAILS RIDGE/HIP RIDGE/HIP FLASH 3" DOUBLE BEAD TAPE SEALER URETHANE SEALANT 1" POP RIVET POP RIVET 1’-0” O.C. SB CLIP "Z" CLOSURE (FIELD CUT) SB...

 Open the catalog to page 11

All MBCI catalogs and technical brochures

  1. Agricultural Catalog 4-2020
    Agricultural Catalog 4-2020

    45  Pages

  2. Commercial Industrial Catalog
    Commercial Industrial Catalog

    76  Pages

  3. Architectural Catalog 1-7-2021
    Architectural Catalog 1-7-2021

    69  Pages

  4. IMP Catalog 4-1-2020
    IMP Catalog 4-1-2020

    96  Pages

  5. SSR Catalog 4-1-2020
    SSR Catalog 4-1-2020

    79  Pages

  6. PBR / Stormproof Slick
    PBR / Stormproof Slick

    2  Pages

  7. Fire Resistant
    Fire Resistant

    4  Pages

  8. HPCI Barrier
    HPCI Barrier

    4  Pages

  9. Retro-R Brochure
    Retro-R Brochure

    4  Pages

  10. Weathertightness Warranties
    Weathertightness Warranties

    8  Pages

  11. Solar Solutions Brochure
    Solar Solutions Brochure

    6  Pages

  12. Retrofit Brochure
    Retrofit Brochure

    8  Pages

  13. Eco-ficient Technical
    Eco-ficient Technical

    24  Pages

  14. Eco-ficient
    Eco-ficient

    20  Pages

  15. Certified Installer Brochure
    Certified Installer Brochure

    4  Pages

  16. Architectural
    Architectural

    32  Pages

Archived catalogs

  1. 5V -Crimp
    5V -Crimp

    20  Pages

  2. BattenLok HS
    BattenLok HS

    102  Pages

  3. Curved BattenLok
    Curved BattenLok

    60  Pages

  4. Designer Series
    Designer Series

    32  Pages

  5. Double-Lok
    Double-Lok

    94  Pages

  6. Double-Lok over R
    Double-Lok over R

    28  Pages

  7. Eco-ficient Classic
    Eco-ficient Classic

    76  Pages

  8. Eco-ficient Grand H
    Eco-ficient Grand H

    48  Pages

  9. Eco-ficient Grand V
    Eco-ficient Grand V

    76  Pages

  10. Eco-ficient Insulated BattenLok
    Eco-ficient Insulated BattenLok

    62  Pages

  11. Eco-ficient Insulated R Panel
    Eco-ficient Insulated R Panel

    108  Pages

  12. Preformed Metal Roof And Wall Systems
    Preformed Metal Roof And Wall Systems

    16  Pages

  13. Eco-ficient
    Eco-ficient

    4  Pages

  14. NuRoof
    NuRoof

    4  Pages

  15. Standing Seam Roof
    Standing Seam Roof

    8  Pages

  16. MBCI
    MBCI

    8  Pages

  17. Curvef Panel Systems
    Curvef Panel Systems

    4  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.