Catalogs >
Maurer SE >
MAURER Betoflex Expansion Joints with anchorage of polymeric concrete

MAURER Betoflex Expansion Joints with anchorage of polymeric concrete
4Pages

Catalog excerpts

MAURER Betoflex Expansion Joints with anchorage of polymeric concrete - 1

Betoflex® Expansion Joints MAURER SOHNE

MAURER Betoflex Expansion Joints with anchorage of polymeric concrete - 2

Maurer Betoflex® Wheel load testing at the TU Munich test bench Maurer Sbhne counts among the leading manufacturers of bridge expansion joints and bridge bearings. Since 1982, the Betoflex® joint sys- tem has been marketed world wide with success, and to date more than 10,000 linear meters of expansion joints employing Betoflex® have been The Betoflex® expansion joint sys- the requirements in road and bridge structures as well as for industrial buildings subject to traffic loads. System components: The watertight expansion joint Whereas in road and bridge con- struction, the Betoflex®...

Open the catalog to page 2

MAURER Betoflex Expansion Joints with anchorage of polymeric concrete - 3

Betoflex® Polymeric Concrete For the sealing of expansion joints in roads and bridges, nowadays almost exclusively strip seal systems are being applied. The MAURER strip seal system employs a special folding mechanism catering for permissible effecting an absolute watertight clamping connection into the steel grooves of the adjacent steel edge beams made of steel grade S235JR. The shape of the edge beams there- by guarantees a continuous bonding over the entire length of the joint to the Betoflex® beam and thus to Since the shape of the steel edge beam entails a continuous anchorage area,...

Open the catalog to page 3

MAURER Betoflex Expansion Joints with anchorage of polymeric concrete - 4

Polymeric concrete is being created by mixing the 2 components resin and hardener together with the min- eral components. Contrary to most polymeric concretes, where the mine- ral components have to be heated in order to achieve the required short curing time, in case of Betoflex0 the temperature of the structure will suf- fice, and no extra heating is required. This results in a high degree of envi- ronmental compatibility and superior When processing Betoflex® not only air humidity needs not be considered, but also Betoflex® is greatly insensi- tive to moisture in the structure. Pre- time...

Open the catalog to page 4