SECCO SUPER
2Pages

RUST-OLEUM MATHYS best solutions in paints & coatings DESCRIPTION Water repellent product based on polysiloxanes. MAIN PROPERTIES Water repellent - water vapour permeable (breathing) - colourless - does not change the colour of the substrate - may be applied on dry recent masonry. RECOMMENDED USES Water repellent treatment of porous walls (bricks, concrete, cement, etc.). TECHNICAL DATA Colour: Density: Solids Content: VOC-content: Flashpoint: Colourless ± 0,8 g/cm3 In volume: ± 5% In weight: ± 5% Practical: Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application. SURFACE PREPARATION Clean and dust off the outside walls that are sufficiently dry. Cracks and fissures must be filled up first. DIRECTION FOR USE To ensure homogeneity, coating materials should be thoroughly stirred prior to use. APPLICATION & THINNING Brush: Apply undiluted until saturation (= wet outlook during a few seconds); it is advisable to apply a second coat within 15 minutes to obtain an optimum impregnation. Roller: Apply with woollen roller with long hairs. Do not dilute. Air-atomised spray: Airless spray: Cleanup: Not recommended. Can be flowed on the substrate with hand pressure equipment after removing the nozzle. Not recommended. White spirit. APPLICATION CONDITIONS Dry weather, outside walls to be as dry as possible. REMARKS • Non-porous surfaces (glass, blue stone, varnished brick, etc.) must be protected from spray mist or spatters of Secco. • Apply Secco only on non-painted mineral or cement containing substrates. The substrate has to be porous. • Can be recovered with Murfill or Paracem. Page: 1 / 2 - Ver. 00 The information contained herein is given in good faith. However, since application conditions are beyond our control, PDS Secco-gb / TE-83 Rust-Oleum Netherlands B.V. cannot assume responsibility for any risks or liabilities which may result from the use of these Issued: 06-04-05 products. The company reserves the right to modify data without prior notice. N.V. Martin Mathys S.A. Kolenbergstraat 23 B - 3545 Zelem Halen, Belgium T +32(0)13 460 200 F +32(0)13 460 201 info. be@ro-m. com www. ro-m. com Rust-Oleum France S.A.S 11. Rue Jules Verne. B.R 60039 95322 St-Leu-la-For6t Cedex France T +33(0)130 400 044 F +33(0)130 409 980 info. fr@ro-m. com www.ro-m.com Rust-Oleum UK Ltd. Unit 6. Spitfire Close Coventry Business Park Coventry, CV5 6UR United Kingdom T +44(0)2476 717 329 F +44(0)2476 718 930 info. uk®ro-m. com www.ro-m.com Rust-Oleum Mathys Italia s.r.l. Largo Donegam 2 20121 Milano, Italia T +39 335 10 93 482 info, it®ro-m. com www. ro-m. com

best solutions in paints & coatings PRODUCT DATA SECCO SUPER SAFETY Consult Safety Data Sheet and Safety Information printed on the can. SHELLIFE / STORAGE CONDITIONS 2 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C. Page: 2 / 2 - Ver. 00 The information contained herein is given in good faith. However, since application conditions are beyond our control, PDS Secco-gb / TE-83 Rust-Oleum Netherlands B.V. cannot assume responsibility for any risks or liabilities which may result from the...