CONCRETE EFFECT • IMITATION CONCRETE FOR A PURE AND MODERN EFFECT APPLICATION INSTRUCTIONS PRIMER - BASE - FINISH

BETON PRIMER The colour of the cachemire BETON PRIMER is white, to get the best result we recommend to tint the primer in the same colour as the cachemire BETON BASE. Apply the primer equally by using a polyester roller (12 - 13mm). Always work in surfaces of 1 to 2 m². Coverage: 150-200 gr/m² Drying time: 2 hours at 20°C/60°r.h. 1 MASK OFF WITH TAPE BEFORE APPLYING THE BETON PRIMER 3 APPLY BETON PRIMER WITH ROLLER 2 APPLY BETON PRIME

BETON BASE First layer Materials: stainless steel trowel, putty knife and a wide putty knife of 20cm with rounded corners. Coverage: 300 - 600 gr/2 coats First layer BETON BASE: always apply the product with a stainless steel trowel (rounded corners) vertically to the wall in strokes of 30 to 50cm. First layer coverage: ± 500 gr/m² After applying the BETON BASE with a trowel, draw irregular vertical lines in the product. Minimum 3cm and maximum 10cm apart from each other (see picture 6). 4 FIRST LAYER EQUIPMENT: STAINLESS STEEL TROWEL (ROUNDED CORNERS) + PUTTY KNIFE 5 FIRST LAYER ALWAYS APPLY...

BETON BASE Second layer Scraping off edges of the first layer and applying of the second layer BETON BASE. When the first layer has dried (minimum 24h drying time) scrape off the edges with a wide putty knife with rounded corners (see picture 8). Apply the second thin layer vertically with a wide putty knife or stainless steel trowel (see picture 10). Coverage second layer: 125gr to 200gr/m² 6 FIRST LAYER DRAWING VERTICAL LINES WITH PUTTY KNIFE 7 FIRST LAYER RESULT AFTER DRYING

BETON BASE 8 SCRAPING OFF EDGES WITH WIDE PUTTY KNIFE 10 SECOND LAYER APPLY THIN LAYER BETON BASE WITH WIDE PUTTY KNIFE 9 SECOND LAYER EQUIPMENT: PUTTY KNIFE AND WIDE PUTTY KNIFE

BETON FINISH After the BETON BASE has dried out, apply the BETON FINISH (10h after 2nd layer BETON BASE). BETON FINISH is a transparent matt gel varnish and can be applied with a rubber wiper, trowel or wiper (see picture). Coverage: 10 - 13m2/kg. Apply enough product on the wall with a brush or rubber wiper. Carefully spread out the BETON FINISH over the wall. Why applying it with a rubber paddle and not a roller? In this way you can apply more product and have a smooth repartition of the gel varnish. □acihemire APPLICATION OF BETON FINISH WITH A RUBBER WIPER Mask off everything with a wide...

SOME DECORATIVE IDEAS How to obtain a “stucco” effect. Apply the cachemire BETON BASE in 2 layers: the first layer has to be thin and smooth, when dry sand this coat, apply the second layer with a stainless steel putty knife. The gloss effect can be achieved by ironing with a stainless steel trowel after which one can apply the cachemire BETON FINISH. How to obtain a flamed metallic effect. Apply this topcoat on the cachemire BETON BASE: a mixture of cachemire BETON FINISH (4/5) and cachemire METALLIC gold/silver/copper (1/5) How to obtain a shimmering flamed metallic effect. Apply this topcoat...