Pt100 Thin-film Temperature Sensor (self-adhesive) to be connected with a Temperature Converter PXT-10

Product catalog summary

Overview: The document provides technical specifications and installation guidelines for the Pt100 Thin-film Temperature Sensor, designed to be used with the Temperature Converter PXT-10. The sensor is self-adhesive and includes a two-meter connecting wire.

Sensor Specifications:

Sensor Element: Resistance thermometer (thin-film) with four connectors, compliant with DIN 43760 and BS1904/1984 standards.
Flexible Casing: Made of silicone rubber.
Adherent Surface: Self-adhesive aluminium foil with a protective cover.
Connecting Wire: Composed of 7 × 0.2mm tinned copper wires, insulated with PTFE, and 2 meters in length.
Resistance: 100Ω at 0°C.
Operating Range: -50°C to +150°C.
Wiring Scheme: Three-wire connection.

Temperature Converter PXT-10 Specifications:

Input: Compatible with Pt-100/1000 sensors, 2/3 wire (DIN43760), with wiring resistance compensation.
Temperature Range: -50°C to 100°C and -50°C to 300°C.
Output: Accuracy of less than 1% without scaling, linearity of less than 0.25%, temperature coefficient of less than 0.02% per °C, and ripple (RMS) of less than 0.1%.
Supply Voltage: Options include 24V DC, 24V AC, 115V AC, and 230V AC with specified voltage ranges.
Power Consumption: 2W for DC and 3VA for AC.
Insulation: 3.75kV AC for 1 minute to supply.
Indication: Green LED indicates power on, yellow LED indicates input signal is 5-10% of peak signal.
Temperature: Environmental temperature range of -20°C to +55°C and storage temperature range of -40°C to +80°C.

Wiring Scheme: The document includes a wiring scheme for connecting the sensor and converter to a datalogger, detailing connections for supply voltage and output signals.

Catalog excerpts

Pt100 Thin-film Temperature Sensor (self-adhesive) to be connected with a Temperature Converter PXT-10-1

meteocontrol GmbH Energy & Weather Service Spicherer Str. 48, D-86157 Augsburg Pt100 Thin-film Temperature Sensor (self-adhesive) to be connected with a Temperature Converter PXT-10 Description: Each rubber strip contains a PT100 Temperature Sensor. The sensor is placed close to an aluminium foil. After removing the protective cover you can attach each sensor directly to the module surface. A two meter connecting wire (PTFE isolated, 7 × 0,2) is included. Sensor Element: Resistance thermometer (thin-film) with four connectors according to DIN 43760 and BS1904/1984 Flexible Casing: Silicone rubber Adherent Surface: Self-adhesive aluminium foil with protective cover Connecting Wire: Wires: 7 × 0,2mm, tinned copper Insulation: PTFE Length: 2m Operating Range: Wiring Scheme: Three wire connection

Open the catalog to page 1

Pt100 Thin-film Temperature Sensor (self-adhesive) to be connected with a Temperature Converter PXT-10-2

Input Sensor: Temp. Range: Output Accuracy: <1% without scaling Linearity: <0,25% Temp. Coefficient: <0,02% / °C Ripple (RMS): <0,1% Supply Voltage 924=24V DC 20,4 – 27,6V DC 024=24V AC 20,4 – 27,6V AC 115=115V AC 98 – 132V AC 230=230V AC 196 – 264V AC Power Consumption DC=2W AC=3VA Insulation To supply: 3,75kV AC 1min Indication Green LED = Power on Yellow LED = Input signal is 5-10% of peak signal Temperature Environm. Temp.: -20 - +55°C Storage Temp.: -40 - +80°C Supply Voltage Buffer Amplifier Wiring Scheme

Open the catalog to page 2