Exterior Inground 400 Series The Exterior™ Inground 400 series is a range of uncomplicated, easyto-use color-changing LED luminaires. Perfect for installations with visible light sources, the Exterior Inground series combines the benefits of dynamic light and discreet installation. The recessed housing can be made to fit any type of surface with a trim ring available in beveled and flush-mount versions, for discreet installation both day and night. The series is available in various configurations. The Exterior Inground 400™ has a narrow beam. The Exterior Inground 410™ blends the output of its RGBW LED sources in its lenses, delivering perfectly pre-mixed colors. And the Exterior Inground 420™ gives variable color temperature white light from 2700 to 6500 K. Bright, efficient in-ground fixture with full LED color mixing Advanced optical performance with uniform distribution of light and color Durable, low-maintenance construction Choice of premixed RGBW, single-color RGBW or variable CT white LEDs Built-in glare shield for high visual comfort Flush-mount and beveled trim ring options for installation in any groundwork Choice of five beam angle options Remote control and configuration via DMX and RDM Rugged drive-over IP67 housing T E CHNI CA L Physical Fixture: Height: 315 mm (12.4 in.) Outer diameter at top of fixture: 310 mm (12.2 in.) Weight: 14.7 kg (32.5 lbs.) Top ring (trim ring): Flush-mount top ring outer diameter: 329 mm (13.0 in.) Flush-mount top ring thickness: 7 mm (0.3 in.) Beveled top ring outer diameter: 340 mm (13.4 in.) Beveled top ring thickness: 5 mm (0.2 in.) Installation Sleeve: Installation sleeve height: 400 mm (15.8 in.) Installation sleeve base flange external diameter: 416 mm (16.4 in.) Dynamic Effects All models Intensity: 0 - 100% Exterior Inground 400 and 410 Color mixing: RGBW Exterior Inground 420 Color temperature control: 2700 K - 6500 K Control and Programming All models ©2015 Martin Professional Olof Palmes Allé 18 • 8200 Aarhus N • Denmark • Phone: +45 87 40 00 00 • Fax: +45 87 40 00 10 • www.martin.com Images contained in this brochure have been converted to CMYK and are not necessarily representative of actual colors. Specifications are subj

Control systems: DMX, RDM DMX addressing and fixture setup: RDM Fixture status monitoring: Multi-color status LED visible through top glass Firmware update: Serial upload via DMX link DMX compliance: USITT DMX512-A RDM compliance: ANSI/ESTA E1.20 Receiver: RS-485 Exterior Inground 400 and 410 DMX channels: 3/4 Exterior Inground 420 DMX channels: 2 Optics All models LED manufacturer: Cree Minimum LED lifetime: 50 000 hours (to >70% lumino us output)* *Figure obtained under manufacturer's test conditions Exterior Inground 400 Light source: R, G, B and W single-color LEDs Beam angle options Narrow...

Measurements made at nominal voltage. Allow for a deviation of +/- 10 %: Thermal Cooling: Conduction / convection Maximum ambient temperature (Ta max.): 45° C (113° F) Minimum ambient temperature (Ta min.): -30° C (-4° F), power must be maintained below 0° C (32° F) Maximum surface temperature, steady state, at 40° C ambient: 90° C (194° F) Total heat dissipation (calculated, +/- 10%): 490 BTU/hr. Approvals EU safety: EN60598-2-5 (EN60598-1), EN60598-2-13, EN62471, EN62493 EU EMC: EN55015, EN61547, EN61000-3-2, EN6100-3-3, EN61000-4-2, EN6100-4-4, EN6100-4-5 US safety: ANSI/UL 1598 US EMC: 47...