430.541 Cedral Operal 10:430.234 slates new style 04 Cedral Weatherboard and Operal

Cedral Weatherboard, Black Lion Street, Brighton Front cover: Cedral Weatherboard, Regency Park, Eastbourne 430.541 Cedral Operal 10:430.234 slates new style 04 Eternit's Marley dding ent cla + rating bre cem fi ve an A E n achie ca the BR ned in as defi e to Guid Green tion* ecifica Sp Marley Eternit is committed to the cost effective and sustainable manufacture of high quality, high performing facade systems. Marley Eternit’s range of cladding products are manufactured under quality management systems, which meet the requirements of ISO 9001 and environmental systems which comply with the internationally...

Cedral Weatherboard, Repton Park, Ashford, Kent 430.541 Cedral Operal 10:430.234 slates new style 04 Cedral Weatherboard Ideal low maintenance, rot free alternative to traditional timber weatherboarding. With the visual appeal of natural timber, simplicity of installation and resistance to rot, Cedral Weatherboard is an attractive, low maintenance alternative to PVCu. Cedral Weatherboard can be supplied in Natural finish for site painting, or in a range of 23 factory applied solid colours and 4 woodstain finishes. Our comprehensive colour range provides an aesthetic option to suit many project...

430.541 Cedral Operal 10:430.234 slates new style 04 Cedral Weatherboard, Cherque Farm, Hampshire Cedral Weatherboard, Repton Park, Ashford, Kent Cedral Weatherboard Product data and colour range Some colours are available on short lead times. Please contact the Customer Services team for details. Cedral Weatherboard is sold in pallet quantities of 144 planks. Bespoke colours are subject to minimum order quantities of 576 planks and subject to extended lead times. Aluminium trims Supplied in colours to match and complement Cedral Weatherboard. Properties (air dry) Installed weight Standards The...

430.541 Cedral Operal 10:430.234 slates new style 04 Cedral Weatherboard colour range Woodstains* Cedral Weatherboard is also available in a range of woodstain shades to simulate the colour and texture of a variety of timber stocks. * Due to the transparent coating, it is not recommended to install Cedral Weatherboard woodstain colours vertically. Cedral Weatherboard and Operal

430.541 Cedral Operal 10:430.234 slates new style 04 Cedral Weatherboard general fixing information Cutting The method of cutting is dependent on the amount there is to be done. It is possible to cut the board with a handsaw, an electric jigsaw or a circular saw. By hand The board can be hand nailed without pre-drilling when the nails are at least 50mm from the end of the board. For nails closer than 50mm to the end, nail positions need pre-drilling with a 3mm drill. Normal HSS drill bits can be used but they will need regular sharpening. Nails should be stainless steel ring shank, minimum size...

430.541 Cedral Operal 10:430.234 slates new style 04 Cedral Weatherboard trims A range of aluminium profiles are available in colours to match and complement Cedral Weatherboard. See page 5 for full range of colours. Available in 3m lengths. 31mm External corner (symmetric) This symmetric external corner is used to provide protection on external corners. External corner/window reveal (asymmetric) Can be used as an external corner or where detailing on a window reveal. External corner bay* This accessory provides a clean and sleek finish to bay window detailing. Internal corner To finish the corner...

430.541 Cedral Operal 10:430.234 slates new style 04 Cedral Weatherboard installation Installing Cedral Weatherboard Each plank must be fixed at least once to every support. The end of every plank must also coincide with a support. Where specified, install vapour barrier or breather membrane over the wall or framework behind the timber studs. Installation begins at the bottom of the facade, where a start profile is fixed first. This is overlapped by the first plank, which starts the layering of the planks. Allow at least 150mm between bottom edge of Cedral Weatherboard and the ground. Fixing...

430.541 Cedral Operal 10:430.234 slates new style 04 Cedral Weatherboard Cedral Weatherboard Overlapping corner This is when the board of one side overlaps the end of the board on the other side. There will always be one end of board showing with this method. These ends need to be decorated to match the finish on Cedral Weatherboard. The transverse cuts of the board at the corner positions will not be perpendicular with the sides of the boards. Plinth detail Main structure 50 x 38mm min. timber battens 600mm c/c max. fixed back to structure Cedral Weatherboard Main structure Perforated closure...

430.541 Cedral Operal 10:430.234 slates new style 04 Cedral Weatherboard installation Soffit detail Sloping soffit detail Perforated closure Perforated closure Line of sloping soffit (gables) Main structure 25 x 50mm batten running parallel with sloping soffit (to support end of boards) Main structure 50 x 38mm min. timber battens 600mm c/c max. fixed back to structure 13 x 50 x 75mm packing at each batten position 50 x 38mm min. timber battens 600mm c/c max. fixed back to structure 30mm lap Window head details Window reveal Cedral Weatherboard 38 x 50mm timber batten Perforated closure Damp...

430.541 Cedral Operal 10:430.234 slates new style 04 Corner/abutment with end profile External corner detail 3mm expansion joint Symmetrical corner profile Nail or screw fixing 100 x 38mm timber batten Nail or screw fixing 38 x 50mm treated batten Damp proof membrane Compressible foam strip Cedral Weatherboard Mastic bead Nail or screw fixing End Profile Damp proof membrane Cedral Weatherboard 50 x 38mm timber batten Main structure Internal corner detail Cedral Weatherboard 38 x 50mm treated batten Damp proof membrane Internal corner profile Nail or screw fixed Nail or screw fixed Cedral Weatherboard...

430.541 Cedral Operal 10:430.234 slates new style 04 Operal, Beverlo, Belgium Operal, Grimbergen, Belgium Operal Product data and colour range Some colours are available on short lead times. Please contact the Customer Services team for details. Sheet sizes All other colours are made to order and will be subject to longer lead times. Nominal thickness Nominal weight Standards The technical properties of Operal sheets are in accordance with the prescriptions of BS EN 12467: 2004, Category A, Class 3. Bending strength: Longitudinal Transverse Longitudinal Transverse Hygroscopic movement Thermal...