1. Catalogs
  2. MARGRES
  3. GROVE CATALOGUE
video corpo

GROVE CATALOGUE

GROVE CATALOGUE
1 / 28 PagesView full catalog

GROVE CATALOGUE

Product catalog summary
Overview: This document provides comprehensive guidelines for installing Margres 20MM porcelain tiles in various environments such as grass, gravel, and screed with adhesive. It highlights the importance of proper preparation and installation techniques to ensure the tiles' stability and durability.
Installation on Grass: For creating pathways with stepping stones, calculate the number of tiles needed and ensure they are evenly spaced. Excavate approximately 5 cm of soil, add a layer of fine gravel, compact the substrate, and position the tiles. Align tiles with the turf to prevent damage to lawn mowers. Required tools include a shovel, fine gravel, a trowel, a rubber mallet, work gloves, and lifting tongs.
Installation on Gravel: Establish a stable substrate using fine gravel with a grain size of 4-8 mm. Level the substrate using a metal straightedge, position the tile, and compact the edges to align with the substrate. A 4 mm joint is recommended for effective water drainage.
Installation on Screed with Adhesive: Thoroughly clean the substrate before installation. Apply a uniform layer of adhesive for a flat result, check planarity during installation, and grout the flooring after completion. Follow manufacturer guidelines for foot traffic post-installation. Post-laying cleaning is essential to remove residues.
Elevated Floor Installation: Prepare necessary slopes for optimal drainage. Margres tiles are low in water absorption and frost-resistant, which may lead to water stagnation near tile edges. A minimum joint of 3 mm is recommended. Required materials include adjustable support, an adjustment key, lifting tongs, a spirit level, a broom, and a dustpan.
Specifications: The document specifies installation requirements for Margres porcelain stoneware tiles, emphasizing their low water absorption and frost resistance. A minimum joint width of 3 mm is recommended to accommodate potential water stagnation near tile edges.
Installation Procedures: Essential tools include adjustable supports, a leveling key, lifting pliers, a spirit level, a shovel, and a broom. The substrate must be thoroughly cleaned and waterproofed before installation. A fifth central support is mandatory for 60x60 tile formats to ensure even load distribution.
Standards and Recommendations: Installations should comply with local regulations and architectural guidelines. Proper slope preparation is crucial for effective drainage. Alternating tiles from different packages is advised for a better visual effect and random application if there are shade variations.
Support and Material Requirements: The support must be stable, free of debris, dust, and cracks, respecting curing times and stability. The document stresses the importance of using appropriate glue and mortar based on the support and intended use of the tiles.
Cutting Instructions: Wet cutting or the score and snap method is recommended to avoid harmful silica dust exposure. Dry cutting with power tools is discouraged.
Joint Application: Joints are essential for aesthetic and technical purposes, facilitating material alignment and absorbing structural deformations. The document emphasizes following local regulations for joint application.
Specifications and Recommendations: For darker colors, it is recommended to increase the minimum joint by 2 mm. Further details can be found in the product's technical data sheet available on the website.
Safety and Preparation: Use appropriate personal protective equipment (PPE) such as safety footwear, gloves, goggles, and hearing protection during material cutting operations. Follow good practices for lifting and carrying loads.
Protection and Cleaning: Clean glue and grout mortar residues immediately after application. Protect ceramic parts after laying. For dirt removal, use buffered descaling acid. Avoid abrasive cleansers on decorated pieces. Regular cleaning should be done with a damp cloth and suitable detergents.
Drilling: Use diamond twist drills with a diameter adaptable to the desired hole.
Life Cycle: Margres minimizes environmental impacts throughout the product life cycle through good environmental management practices. At the end of the product's life, prioritize reuse or recycling.
Polished and Soft Shiny Products: These finishes require specialized application and maintenance. They are suitable for areas not subjected to heavy traffic. Use protective solutions to prevent scratches if in contact with external environments. Clean with suitable detergents and avoid abrasive products.
See more

Catalog excerpts

GROVE CATALOGUE-1

SIZE 40X120 E ASR | 2 COLOURS: GREY, LIGHT BROWN SIZE 20X120 AS | 4 COLOURS: GREY, BEIGE, TORTORA, LIGHT BROWN SIZE 20X120 N | 6 COLOURS: GREY, WHITE, BEIGE, TORTORA, LIGHT BROWN, BROWN

 Open the catalog to page 1
GROVE CATALOGUE-2

SIZE 40X120 E ASR _ 2 COLOURS: GREY, LIGHT BROWN SIZE 20X120 AS _ 4 COLOURS: GREY, BEIGE, TORTORA, LIGHT BROWN SIZE 20X120 N _ 6 COLOURS: GREY, WHITE, BEIGE, TORTORA, LIGHT BROWN, BROWN

 Open the catalog to page 2
GROVE CATALOGUE-3

TWO THICKNESSES GROVE BRINGS LIFE TO YOUR SPACE. WITH ITS ATTRACTIVE COLOUR SHADES VARIATION, YOU CAN CREATE ENVIRONMENTS FULL OF LIFE AND MODERNITY. DEUX ÉPAISSEURS _ ZWEI STARKEN _ DUAS ESPESSURAS GROVE DONNE DE LA VIE À VOTRE ESPACE. UNE GAMME PROFONDE DE COLORIS DANS CETTE COLLECTION PERMET LA CRÉATION D’AMBIANCES PLEINES DE VIE ET DE MODERNITÉ. GROVE MACHT IHR DAHEIM LEBENDIG. DIE REICHE FARBPALETTE ERMÖGLICHT MODERNE UND LEBENSLUSTIGE AMBIENTE ZU SCHAFFEN. TWO FINISHES DEUX FINITIONS _ ZWEI FERTIGUNGEN _ DUAS ACABAMENTOS Pour plus d’informations, veuillez consulter http://evaluation.cstb.fr...

 Open the catalog to page 3
GROVE CATALOGUE-4

GROVE WHITE GR1 20X120 N _ LINEA SUBWAY WHITE LSW1 100X300 NR

 Open the catalog to page 4
GROVE CATALOGUE-8

GROVE BROWN GR6 20X120 N _ LIGHT BROWN GR5 20X120 AS

 Open the catalog to page 8
GROVE CATALOGUE-9

GROVE LIGHT BROWN GR5 20X120 AS

 Open the catalog to page 9
GROVE CATALOGUE-10

GROVE GREY GR3 20X120 N _ GREY GR3 20X120 AS

 Open the catalog to page 10
GROVE CATALOGUE-11

GROVE GREY GR3 20X120 N _ GREY GR3 20X120 AS

 Open the catalog to page 11
GROVE CATALOGUE-12

GROVE LIGHT BROWN GR5 40X120 E ASR

 Open the catalog to page 12
GROVE CATALOGUE-14

SPECIAL PIECES PIÈCE S SPÉCIALE S _ SPEZIALTEILE _ PEÇA S E SPECIAIS SKIRTING* PLINTHE* SOCKEL* RODAPÉ BOLEADO* 8X120 _ N MP-6200 Available in all colours Disponible dans toutes les couleurs Erhältlich in allen Farben Disponível em todas as cores LAYING SUGGESTIONS _ SUGGESTIONS DE POSE _ ANWENDUNGSVORSCHLÄGE _ SUGESTÕES DE APLICAÇÃO

 Open the catalog to page 14
GROVE CATALOGUE-15

SPECIAL PIECES INSTRUCTIONS FOR MATCHING SIZES AND PEDESTALS IN ELEVATED FLOOR INSTALLATION INSTRUCTION POUR LE COUPLAGE DES FORMATS ET SUPPORTS LORS DE LA POSE SURÉLEVÉE ANWEISUNGEN FÜR DIE VERBINDUNG VON FORMATEN UND AUFLAGEN BEI DER VERLEGUNG VON DOPPELBÖDEN INSTRUÇÕES DE COMBINAÇÃO DE TAMANHOS E SUPORTES NA APLICAÇÃO SOBREELEVADA PIÈCE S SPÉCIALE S _ SPEZIALTEILE _ PEÇA S E SPECIAIS STRAIGHT EDGE MARGELLE STUFENPLATTE BASE 30x60 _ 12”x24” _ E ASR MP-6490 BULLNOSE MARGELLE ARRONDIE STUFENPLATTE ABGERUNDET BASE BOLEADA 30x60 _ 12”x24” _ E ASR MP-6500 STEP EXTRA THICK 20MM NEZ DE MARCHE FORTE...

 Open the catalog to page 15
GROVE CATALOGUE-16

INTENDED USES Resistant to heav y loads Résistant aux charges de rupture Biegefestigkeit Resistente às cargas pesadas Anti-slip Antidérapant Rutschfest Antiderrapante Easy to clean Facile à entretenir Pflegeleicht Fácil de limpar Resistant to thermal shock Résistant aux changements de température Temperatur wechselbeständigkeit Resistente ao choque térmico Frost-resistant and fire-proof Résistant au gel et ignifuge Frost- und Feuerfest Resistente ao gelo e ao fogo Easy to install Facile à poser Leicht zu verlegen Fácil de instalar Resistant to stains, acids and chemical agents Résistant aux taches,...

 Open the catalog to page 16
GROVE CATALOGUE-17

KLEBERV ERLEGUNG AUF E STRICH _ APLICAÇÃO EM CIMENTO OU BE TONILHA The application layers proposed hereunder are to be taken as an indication, and have the sole purpose of explaining how to obtain a correct flooring. It is recommended to always refer to the specific norms and regulations in each individual country and the instructions of the design team. Les stratigraphies proposées ci-dessous doivent être considérées comme indicatives et ont le seul but d’illustrer la typologie d’application pour l’obtention d’un sol effectué selon les règles de l’art. On recommande de toujours vous référer...

 Open the catalog to page 17
GROVE CATALOGUE-18

To create a pathway with stepping stones it is important, first of all, to determine the number of steps necessar y, making sure that the tiles are positioned equidistantly. So as to obtain maximum stability, it is recommended to dig out about 5cm from the soil, and then place a fine layer of gravel. Compact the substrate and then position the tile. It is better to lay the surface of the tiles in line with the turf to avoid damaging lawn mowers. Shovel, fine gravel (grain size 4-8 mm), trowel with square tip, rubber mallet, work gloves and lifting tong. IMG. 1 Position the 20MM tiles on the ground...

 Open the catalog to page 18
GROVE CATALOGUE-19

GR AV EL (GROUND/SOIL) GR AV IER (TERR AIN) KIE S (ERDBODEN) GR AV ILHA (SOLO TERROSO) Margres 20MM porcelain tile Grès cérame Margres 20MM Feinsteinzeug Margres 20MM Placa cerâmica de 20MM Margres 5-6 cm of gravel with a fine grain size 4/8 mm 5-6 cm de gravier de granulométrie fine 4/8 mm 5-6 cm Kies mit feiner Körnung 4/8 mm 5-6cm de gravilha de grão 4-8mm Draining layer Couche de drainage Dränageschicht Camada de escoamento Form a stable and uniform substrate using fine gravel (grain size 4/8 mm). Réaliser un support stable et uniforme à l’aide du gravier fin (granulométrie 4/8 mm). Ground...

 Open the catalog to page 19
GROVE CATALOGUE-20

SCREED (GROUND) CHAPE (TERR AIN) E STRICH (ERDBODEN) GR AV ILHA (SOLO) Margres 20MM porcelain tile Grès cérame Margres 20MM Feinsteinzeug Margres 20MM Placa cerâmica de 20MM Margres Sloping screed (if necessar y with a welded reinforcement mesh) min Chape en pente (éventuelle maille électro-soudée) minimum Geneigter Estrich (eventuell Bewehrungsmatte) mind. Camada de inclinação (reforçada com malha se necessário) mínimo de Levelling layer Couche de nivellement Nivellierungsschicht Camada de regularização Before proceeding with the installation clean the substrate thoroughly. Avant de procéder...

 Open the catalog to page 20
GROVE CATALOGUE-21

E L E VAT E D F L O O R S (H A R D B A S E ) L AY I N G O N F L AT S U R FA C E S The application layers proposed hereunder are to be taken as an indication, and have the sole purpose of explaining how to obtain a correct flooring. It is recommended to always refer to the specific norms and regulations in each individual countr y and the instructions of the design team. So as to have optimal draining of the elevated floor it is better to prepare the necessar y slopes during installation of the base. It is important to note that Margres porcelain tiles have extremely low water absorption rates...

 Open the catalog to page 21

All MARGRES catalogs and technical brochures

  1. TOOL CATALOGUE

    35  Pages

  2. EDGE CATALOGUE

    23  Pages

  3. EVOKE CATALOGUE

    29  Pages

  4. LINEA CATALOGUE

    67  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.