Fitting Instructions M Series
2Pages

Selecting the Correct Backset Contents Inside Package x2 Flush Pull Midline Flush Pull Privacy Set Flush Pull Midline Installation Instructions If you are installing into a wooden door you will need to follow the steps below to swap from 35mm backset to 50-55mm backset. x1 Caution: When changing backset, ball bearing and spring might come out. Mardeco International Ltd. retains the right to change products and specifications without notice. Copyright © 2012 Mardeco International Ltd. All rights reserved. For full Terms & Conditions please visit our website. Please ensure you have received all the correct parts before installation. Mardeco International Ltd takes no responsibility for incorrect product being fitted. Stainless Steel Screws supplied by: Germany Scan QR code to view a step by step installation video

Mark midline on all 3 faces of the door. Choose a height that will be comfortable for all users to reach. Wood Cutout: Remove middle section of flush pull template and mark cutout outline. Use midline as height reference. Mark for desired backset (35 or 50/55mm). Cut through all. Aluminium Cutout: Match midline with template midline and position for desired backset. Mark aluminium cutout outline. Cut through all. Remove middle section of end pull template and mark rebate outline on end of door. Use midline as height reference. Cut 3mm rebate. Place middle section of template into rebate and...