iti r ff ie ra rr G a rd B a llG a W Reversible graffiti-resistant protective barrier for all surfaces WHERE TO USE • Protection of marble, granite and other natural stone facings against spray-painted graffiti. not alter the appearance of the surface. • Protection of porous and non-porous facings. On some surfaces such as polished marble, ceramic tiles, or materials with low absorbency, the surface treated may become slightly opaque. Therefore testing beforehand is recommended. For best results extend the treatment up to the stringcourse, the expansion joints or conductors. Some application examples On all surfaces that are potential targets for graffiti, such as: • all types of natural stone facings; • brick or concrete block facings; • concrete facings; • painted renders resistant to high pressure cleaning; • painted wood. TECHNICAL CHARACTERISTICS WallGard Graffiti Barrier is a water emulsion of polymer waxes specifically formulated for reversible protection of facings against graffiti. WallGard Graffiti Barrier fills surface pores without affecting vapour-permeability, creating a repellent barrier against oils and water that prevents graffiti from penetrating deeply. WallGard Graffiti Barrier forms a film that does WallGard Graffiti Barrier is easily removable using hot water (about +80°C) in a high pressure cleaner. RECOMMENDATIONS • Do not use WallGard Graffiti Barrier to consolidate surfaces. • Do not dilute WallGard Graffiti Barrier with solvents or water.

• Do not apply WallGard Graffiti Barrier on substrates that are saturated with water or when rain is imminent. • Do not apply WallGard Graffiti Barrier at temperatures below +8°C and above +35°C. Application procedure WallGard Graffiti Barrier can be applied with brush, roller or spray. The latter is preferable for rough or irregular surfaces. For thorough impregnation WallGard Graffiti Barrier should be applied to saturation in a single coat. On very porous surfaces, apply a second coat, if needed, 20 minutes later at +20°C. Graffiti removal Graffiti can be removed from surfaces treated with...

TECHNICAL DATA (typical values) PRODUCT IDENTITY Consistency: runny liquid milky white 12 months in original sealed packaging Hazard classification according to 1999/45/CE: none. Before using refer to the “Safety Instructions for the preparation and application” paragraph and the information on the packing and safety data sheet Customs class: APPLICATION DATA Drying time: Application temperature range: subject to confirmation after long-term practical application: for this reason, anyone who intends to use the product must ensure beforehand that it is suitable for the envisaged application: in...

Any reproduction of texts, photos and illustrations published here is prohibited and subject to prosecution