One-component trowellable coarse-textured cementitious paste applied in layers up to 2 mm thick to create decorative floors with a trowelled or mottled effect finish WHERE TO USE Ultratop Loft F is the ideal coating product to create decorative internal floors and walls with a marked materic effect. Thanks to its ease of use, versatility and resistance to abrasion, this formulate is ideal for creating floors subjected to intense pedestrian traffic in areas such as bars, shops, restaurants, hotel lobbies, private homes, cafes, hotels and showrooms, and generally in all areas relating to interior decorating in the civil building sector. The consistency of the product and limited thickness of the coat applied, and the possibility of applying it on vertical surfaces and combining it with a wide range of colours, allows an infinite variety of original and unique coatings to be created. Typical application examples • Creating decorative floors in shops. • Creating decorative floors in residential surroundings. • Creating decorative coatings on floors, walls and ceilings with a trowelled effect finish. • Creating decorative floors and walls in bars, cafes and restaurants. • Creating decorative floors in wellness centres, hotel receptions and showrooms. • In all areas in the civil building sector where a smooth or textured trowelled effect coating with a cementitious matrix is required. TECHNICAL CHARACTERISTICS Ultratop Loft F is a powdered formulate made from special rapid-setting and hydrating binders, graded silica sand, synthetic resin and special additives according to a formulation developed in the MAPEI R&D laboratories. Once mixed, with water or directly with Ultratop Easycolor pigment, it forms a trowellable paste that is easy to apply by hand with a smooth rubber, Teflon or steel trowel. Also, thanks to the creamy consistency of the product, highly original decorative finishes may be obtained, such as classic trowelled or mottled effects, in a multitude of colour shades. Once hardened Ultratop Loft F has good resistance to abrasion. ADVANTAGES • Easy to prepare: may be mixed with water only and, if required, coloured by addi

pre-dispersed Ultratop Easycolor pigment. • Easy to apply with a trowel and dries rapidly. • Versatile: may be used for both new floors and to refurbish existing floors. • May be applied on both horizontal and vertical surfaces. • Suitable for use in both commercial and residential surroundings. • Coated surfaces may be put into service quickly. RECOMMENDATIONS • Do not apply Ultratop Loft F on dusty or crumbling surfaces or on surfaces with oil or grease stains; • Do not add lime, cement, gypsum or other binders to Ultratop Loft F. • Do not apply Ultratop Loft F on substrates with capillary...

TECHNICAL DATA (typical values) In compliance with norm: PRODUCT IDENTITY Consistency: Bulk density (kg/m³): APPLICATION DATA (at +23°C - 50% R.H.) Mixing ratio: approx. 25-29 parts of water per 100 parts by weight of Ultratop Loft F Application temperature: Workability time: Setting time: Recoat time: Waiting time before applying finishing coat: FINAL PERFORMANCE DATA Performance characteristic Test method Requirements according to EN 13813 for cementitious screeds 5 < N/mm² < 80 (after 28 days) Compressive strength: 1 < N/mm² < 50 (after 28 days) Taber abrasion resistance expressed as loss...

a suitable container with 25-29% by weight of clean water with an electric mixer at low-speed until it forms a smooth, lump-free paste. It is recommended to prepare Ultratop Loft F in separate 5 kg batches, because of the high yield of the mixed product. If, on the other hand, a coloured coating is required, Ultratop Loft F may be mixed directly in a clean container large enough for the amount required by adding Ultratop Easycolor predispersed pigment only and no water in the following dosage: one 1.5 litre can of Ultratop Easycolor every 5 kg of Ultratop Loft F (refer to the Ultratop Easycolor...

Please refer to the current version of the Technical Data Sheet, available from our website www.mapei.com LEGAL NOTICE The contents of this Technical Data Sheet (“TDS”) may be copied into another project-related document, but the resulting document shall not supplement or replace requirements per the TDS in force at the time of the MAPEI product installation. The most up-to-date TDS can be downloaded from our website www.mapei.com. ANY ALTERATION TO THE WORDING OR REQUIREMENTS CONTAINED OR DERIVED FROM THIS TDS EXCLUDES THE RESPONSIBILITY OF MAPEI. This symbol is a conformity mark which proves...

Any reproduction of texts, photos and illustrations published here is prohibited and subject to prosecution