Catalogs >
MAPEI >
SILWOOD

SILWOOD
1 / 4Pages

Catalog excerpts

d o o lw i S Acrylic sealant in water dispersion for wooden floors WHERE TO USE Sealing perimeter joints in wooden floors and joints between different types of floors when there is no joint trim. APPLICATION PROCEDURE Preparation of the substrate The surfaces to be sealed must be clean, dry, and free of dust and greasy substances. TECHNICAL CHARACTERISTICS Silwood is a solvent-free acrylic sealant in water dispersion for wooden and laminated floors. It is available in a number of colours, which are very similar to the various types of wood most commonly used. It is characterised by good flexibility, excellent bond strength and excellent filling capacity. Application of the product Cut the tube at the end of the threaded part. Screw on the nozzle and make a cut at 45° according to the size of the joint. Insert the tube into the extrusion gun. Once dry, Silwood may be sanded down and painted over. RECOMMENDATIONS • not use Silwood at temperatures lower Do than +10°C. • not use for external applications. Do • pre-finished parquet, choose the most On suitable colour of Silwood available before application. In the case of painted or pre-finished parquet or on other types of floor, protect the joint area using masking tape, which must then be removed immediately after applying Silwood. Cleaning Traces of Silwood must be removed from painted and pre-finished floors while still fresh with water. CONSUMPTION According to the size of the joint to be filled, calculating that its density is 1.75 g/cm³. PACKAGING 310 ml cartridges.

Open the catalog to page 1

PRODUCT IDENTITY STORAGE 24 months in its original packaging in a dry area. SAFETY INSTRUCTIONS FOR PREPARATION AND APPLICATION Silwood is not considered as dangerous according to the current regulation redarding the classification of mixtures. It is however recommended to use gloves, eyes protection and to take the usual precautions for handling chemicals. For further and complete information about the safe use of our product please refer to the latest version of our Material Safety Data Sheet. PRODUCT FOR PROFESSIONAL USE. WARNING Although the technical details and

Open the catalog to page 2

recommendations contained in this product data sheet correspond to the best of our knowledge and experience, all the above information must, in every case, be taken as merely indicative and subject to confirmation after long-term practical application; for this reason, anyone who intends to use the product must ensure beforehand that it is suitable for the envisaged application. In every case, the user alone is fully responsible for any consequences deriving from the use of the product. Please refer to the current version of the Technical Data Sheet, available from our website www.mapei.com...

Open the catalog to page 3