Catalogs >
MAPEI >
Resin & Cementitious Flooring

Resin & Cementitious Flooring
22Pages

Add to favorites

Catalog excerpts

MAPEFLOOR SYSTEM ULTRATOP SYSTEM

Open the catalog to page 1

Ipercoop - Faenza - Italy - Products used: PRIMER SN, ULTRATOP, MAPEFLOOR FINISH 52 W, MAPELUX OPACA

Open the catalog to page 2

SELECTION TABLE FOR CEMENTITIOUS AND RESIN FLOORING INSTALLATION KEY (*) MAPEFLOOR SYSTEMS that may be coloured using MAPECOLOR PASTE, \ I concentrated coloured paste for colouring the neutral base products of the systems ** N.B. MAPEFLOOR FILLER must never be added to MAPEFLOOR FINISH 52 W when used on either anthracite or red ULTRATOP N.B. - THIS TABLE IS MERELY INDICATIVE; FOR FURTHER INFORMATION, REFER TO THE TECHNICAL DATA SHEET FOR EACH PRODUCT

Open the catalog to page 3

'RODUCTS TO BE USED IN THE VARIOUS SYSTEI Primer to be used on cementitious substrates Primer to be used on ceramic and natural stone substrates as an alternative to PRIMER SN 0 The various alternative finishing products must be used according to the strength characteristics required and the aesthetic effect required 0 Products required for each system and their relative properties □ Metallic waxes to be used in alternation, according to the aesthetic effect required

Open the catalog to page 4

SYSTEMS FOR RESIN AND CEMENTITIOUS FLOORING In the resin and cementitious-based ooring sector, Mapei have developed a wide range of technologically advanced systems which offer high standards of quality for each specic area of use, including public, private, industrial and civil applications. These standards are a guarantee for the nal user of their characteristics of functionality, ease of maintenance and an attractive nish. Mapei’s research laboratories have developed two main product groups: Mapeoor System, a complete range of epoxy and polyurethane systems, and Ultratop System, a...

Open the catalog to page 5

Mapeoor System 31 Non-slip, multi-layered epoxy system, applied at a thickness from 0.8 to 1.2 mm, for oors with a vapour barrier subject to medium/light trafc and where high chemical resistance is required. Products required: Primer SN Mapeoor I 300 SL Mapecolor Paste Quartz 0.5 Quartz 0.25 Mapei solution Prepare the substrate by grinding or shot blasting, to guarantee the best performance of the MAPEFLOOR SYSTEM 31 epoxy system. Any defects present, such as holes, pitting, cracking, etc. must be repaired beforehand using either EPORIP, PRIMER SN or MAPEFLOOR I 300 SL, according to the...

Open the catalog to page 6

Mapeoor System 33 Self-levelling, solvent-free epoxy system applied at a thickness from 2 to 4 mm for oors with a vapour barrier, for shopping centres, aseptic rooms, the food industry and in all those applications where work surfaces are not subject to frequent wetting. Products required: Primer SN Mapeoor I 300 SL Mapecolor Paste Quartz 0,5 Quartz 0,25 Mapelux Lucida or Mapelux Opaca (Mapeoor Filler) Mapei solution Prepare the substrate by shot blasting or grinding, to guarantee the best performance of the MAPEFLOOR SYSTEM 33 epoxy system. Any defects present, such as holes, pitting,...

Open the catalog to page 7

Mapeoor System 51 Non-slip, multi-layered epoxy system applied at an average thickness of 3 mm, also suitable for oors without a vapour barrier subject to mediumlight trafc and where only low chemical resistance is required. Products required: Mapeoor I 500 W Mapecolor Paste Quartz 0.5 Mapei solution Preparation of the substrate by shot blasting. Any defects present, such as holes, pitting, cracking, etc. must be repaired beforehand using either EPORIP, PRIMER SN or MAPEFLOOR I 500 W, according to the width and depth of the defects and cracks. Where required, consolidation operations must...

Open the catalog to page 8

Mapeoor System 53 Self-levelling, solvent-free epoxy system applied at an average thickness of 4 mm, also suitable for oors without a vapour barrier in shopping centres, aseptic rooms, the food industry and the pharmaceutical industry. Products required: Mapecoat I 600 W Mapeoor I 500 W Mapecolor Paste Quartz 0.5 Mapelux Lucida or Mapelux Opaca (Mapeoor Filler) Mapei solution Prepare the substrate by shot blasting, being careful to not go too deep down into the substrate. Any defects present, such as holes, pitting, cracking, etc. must be repaired beforehand using either EPORIP, PRIMER SN...

Open the catalog to page 9

Mapeoor System 91 Renovation of old oors subject to medium-heavy trafc where high chemical resistance is required, by means of an epoxy mortar layer with a consistency similar to a mortar screed, applied by trowel at a thickness between 6 and 15 mm. Products required: Primer SN Mapeoor I 900 Mapeoor I 300 SL Mapeex PU30 Mapeex PU40 Mapeex PU45 Quartz 1.9 Quartz 0.5 Quartz 0.25 Mapei solution Prepare the substrate by milling or shot blasting, and remove residual dust with a vacuum cleaner. Any defects present, such as holes, pitting, cracking, etc. must be repaired beforehand using either...

Open the catalog to page 10

Mapeoor Parking System Solvent-free, multi-layered, continuous-spread, non-slip exible polyurethane system applied at a thickness of from 3 to 3.5 mm, for oors and elastomeric waterproong in multi-storey car-parks subject to intense trafc. Products used: Primer SN Mapeoor PU 400 Mapeoor PU 410 Mapecolor Paste Mapeoor Finish 51 Mapei solution Prepare the substrate by grinding or shot blasting to guarantee the best performance from the MAPEFLOOR PARKING SYSTEM polyurethane system. Any defects present, such as holes, pitting, cracking, etc. must be repaired beforehand using either EPORIP or...

Open the catalog to page 11

Mapeoor CPU/HD Polyurethane cement-based formulate, with high mechanical strength and resistance to chemicals. Applied at a thickness of from 6 to 9 mm, it is ideal for oors subject to heavy trafc, high chemical attack and subject to high thermal shock, such as storage warehouses, production facilities in the food, chemical and pharmaceutical industries. Products required: Mapeoor CPU/HD Mapei solution Prepare the substrate by milling and the creation of grooves close to and around the vertical areas and, if present, any drainage holes. Mark out a diagonal line on the surface of the oor to...

Open the catalog to page 12

“Natural effect” Ultratop System Formation and repair of the functionality of oors used in industry, shopping centres and supermarkets by spreading self-levelling, abrasion-resistant, ultra fast-setting cementitious mortar at a thickness between 5 and 40 mm. The system is also suitable for creating internal cementitious oors in civil environments. Products required: Primer SN or Primer G or Mapeprim SP Ultratop Mapeoor Finish 50 or Mapeoor Finish 52 W Mapelux Lucida or Mapelux Opaca (Mapeoor Filler) Mapei solution Prepare the substrate by shot blasting or milling, and remove residual dust...

Open the catalog to page 13

Resin & Cementitious Flooring 22Pages

Catalog excerpts

All MAPEI catalogs and technical brochures

Resin & Cementitious Flooring
22Pages