Rapid solutions for maintenance work on roads, in industrial environments and to urban features Rapid solutions for maintenance work on roads, in industrial environments and to urban features Mape-Asphalt Repair 0/8 Mapegrout SV Mapegrout SV T Mapegrout SV Fiber Mapegrout Hi-Flow TI 20 For repairing: Rapid solutions for maintenance work on roads, in industrial environments and to urban features HEADQUARTERS MAPEI Spa Via Cafiero, 22 - 20158 Milan Tel. +39-02-37673.1 Fax +39-02-37673.214 Internet: www.mapei.com E-mail: [email protected] • roads • motorways • courtyards • airports • in industrial environments • infrastructures (water, electricity and gas) • quick, easy application • harden without SHRINKAGE • allow repaired structures to be put back into service rapidly, roads may be reopened quickly

castable mortar Castable normal-setting, controlled-shrinkage, high-ductility, cementitious mortar used in conjunction with metallic fibres (Fibres R60). Used for: cold-applied reactive asphalt for repairing holes epairing joints in motorways R Repairing the lower rib on pre-compressed beams or for levelling pier caps and bearing elements on motorway viaduct piles Reintegrating sections of reinforced cement pillars and beams Repairing concrete industrial floors, roads and road surfaces in airports Repairing New-Jersey crash barriers by casting into formwork Meets the minimum requirements of EN...

One-component, ready-to-use, cold-applied reactive asphalt for repairing holes in roads. Used for: epairing holes in roads and motorways without R interrupting the flow of traffic Repairing asphalt industrial floors and courtyards Repairing pavements and car-parks

R4 Castable rapid-setting and hardening, controlled-shrinkage mortar, available in grey and black. Used for: Repairing concrete floors in industrial environments, warehouses, shopping centres, etc. Repairing road surfaces in airports Anchoring manhole covers and inspection shafts Anchoring urban features Meets the minimum requirements of EN 1504-3 for R4-class structural mortar Packaged in 25 kg vacuum-packed waterproof polyethylene sacks

R4 Rapid-setting and hardening, controlled-shrinkage thixotropic mortar, available in black. Used for: Repairing concrete elements and floors, including those on a slope Repairing access ramps for vehicles Repairing concrete drainage channels Anchoring drainage channels between the road and guard-rail or kerb Anchoring urban features Meets the minimum requirements of EN 1504-3 for R4-class structural mortar Packaged in 25 kg vacuum-packed waterproof polyethylene sacks

R4 Castable rapid-setting and hardening, controlled-shrinkage, high-ductility mortar used in conjunction with metallic fibres (Fibres R38). Suitable for application down to -5°C. Used for: Repairing concrete industrial floors, roads and road surfaces in airports Repairing the outer face of floor slabs on bridges and viaducts before applying waterproofing treatments Repairing joints in motorways Anchoring manhole covers and inspection shafts subjected to high dynamic loads Rebuilding and levelling the upper parts of pier caps and bearing elements on viaduct piles Meets the minimum requirements...