*myarchiexpo

Catalogs
MAPEI
General Catalogue

General Catalogue

Product catalog summary

Screeds and Smoothing Compounds Overview

This document provides detailed technical specifications and application guidelines for various screeds and smoothing compounds used in construction. The products are designed for different flooring needs, including ceramic, natural stone, resilient, and wooden coatings.

1. Screeds

Mapecem: A quick-setting and drying hydraulic binder for screeds with a workability time of 20-30 minutes and set to light foot traffic after 2-3 hours. It is suitable for ceramic tiles and stone material after 3 hours and for resilient and wood coverings after 24 hours.
Mapecem Pronto: A pre-blended, ready-to-use mortar with similar properties to Mapecem, offering a workability time of 20-30 minutes and setting to light foot traffic after 2-3 hours.
Topcem: A normal-setting, quick-drying hydraulic binder for screeds, with a workability time of 40-60 minutes and setting to light foot traffic after 12 hours.
Topcem Pronto: A ready-to-use mortar with a workability time of 40-60 minutes, setting to light foot traffic after 12 hours.

2. Smoothing Compounds

Fiberplan: A self-levelling, fibre-reinforced compound for thicknesses from 3 to 10 mm, recommended for wood.
Pianodur R: An ultra quick-setting self-levelling compound for thicknesses up to 3 mm, suitable for floors subject to intense traffic.
Pianocem M: A thixotropic cementitious compound for thicknesses from 1 to 5 mm, applicable on vertical surfaces.
Nivorapid: A quick-drying, thixotropic compound for thicknesses from 1 to 20 mm, including vertical surfaces.
Novoplan Maxi: A rapid-hardening, fibre-reinforced levelling mortar for underfloor heating/cooling systems, applied in layers from 3 to 40 mm.
Planopur: A two-component, self-levelling polyurethane compound for all types of substrate, especially deformable types.
Planipatch: A fine-grained, ultra quick-drying compound for thicknesses from 0 to 10 mm, including vertical surfaces.
Planiprep Fast Track: An ultra rapid-drying skimming compound for levelling and skimming new and existing substrates.
Planiprep 4 LVT: A ready-to-use grout smoother for lose-lay LVT, suitable for levelling and smoothing existing surfaces.
Ultraplan Maxi: A self-levelling, ultra quick-hardening compound for thicknesses from 3 to 30 mm.
Ultraplan Eco: A self-levelling, ultra quick-hardening compound for thicknesses from 1 to 10 mm, with low VOC emissions.
Ultraplan Fast Track: An ultra-fast drying self-levelling compound for quick restoration of resilient floors.
Ultraplan: A self-levelling, ultra quick-hardening compound for thicknesses from 1 to 10 mm.
Planitop Fast 330: A quick-setting, fibre-reinforced levelling mortar for internal and external applications, applied in layers from 3 to 30 mm.

Technical Standards and Certifications

The products comply with various European standards such as EN 12620, EN 13139, EN 13813, and EN 934-2, ensuring quality and performance. They also feature low emissions, certified by EMICODE EC1 R Plus.

Application and Storage

Most products have a storage life of 12 months and are applied using tools like trowels, rakes, or pumps. They are packaged in bags or drums, with specific consumption rates per mm of thickness.

Nivoplan Smoothing Mortar

Usage: Suitable for internal and external walls and ceilings for ceramic and natural stone coatings.
Workability Time: 2-3 hours.
Application Thickness: 2 to 30 mm.
Waiting Time Before Laying: 4 hours, depending on thickness.
Application Method: Trowel.
Colours: Grey and white.
Storage: 12 months.
Consumption: 1.4 kg/m² per mm of thickness.
Packaging: 25 kg bags.
Compliance: European Standard GP-CS IV EN 998-1.

Adesilex P4 Levelling Compound

Usage: For floors with ceramic and natural stone coatings.
Workability Time: More than 60 minutes.
Application Thickness: 3 to 20 mm.
Set to Light Foot Traffic: Approximately 4 hours.
Application Method: No. 6 or 10 rounded notched trowel.
Colour: Grey.
Storage: 12 months.
Consumption: 4-10 kg/m².
Packaging: 25 kg bags.
Compliance: EN 12004.

Mapesilent Soundproofing Products

Mapesilent Roll: Bitumen and polymer-based membrane with polyester reinforcement.
- Impact Strength: 900 mm.
- Noise Reduction: 37 dB.
- Thermal Resistance: 0.145 m²K/W.
- Packaging: Pallets containing 160 m².
Mapesilent Panel: Similar to Roll but in tile format.
- Noise Reduction: 42 dB.
- Thermal Resistance: 0.313 m²K/W.
- Packaging: Pallets containing 75 m².
Mapesilent Band R: Adhesive band for perimeter walls to avoid acoustic bridges.
- Thickness: 5 mm.
- Packaging: 4 rolls of 50 m each.

Primers and Bonding Products

Eco Prim PU 1K Turbo: Rapid-drying polyurethane primer.
- Set to Light Foot Traffic: 30-40 minutes.
- Consumption: 0.2-0.4 kg/m² per coat.
- Packaging: 10 kg drums.
Eco Prim Grip: Bonding promoter and primer.
- Waiting Time Before Applying Render: 15-20 minutes.
- Consumption: 0.20-0.30 kg/m².
- Packaging: 10 kg and 5 kg drums.
Mapecoat I 600 W: Two-component transparent epoxy primer.
- Consumption: 0.10-0.15 kg/m².
- Packaging: 2 and 10 kg.

Catalog excerpts

GENERAL CATALOGUE JANUARY 2016 GENERAL CATALOGUE HEAD OFFICE MAPEI S.p.A. Via Cafiero, 22 - 20158 Milan Tel. +39-02-37673.1 Fax +39-02-37673.214 Internet: www.mapei.com E-mail: [email protected] ADHESIVES • SEALANTS • CHEMICAL PRODUCTS FOR BUILDIN

Open the catalog to page 1

GENERAL CATALOGUE

Open the catalog to page 2

6 1. SCREEDS AND SMOOTHING COMPOUNDS 20 3. PRIMERS, BONDING PROMOTERS, CONSOLIDATING AND WATERPROOFING PRODUCTS 30 4. ADHESIVES FOR CERAMIC TILES AND STONE MATERIAL 32 4.1 Hydraulic binder based adhesives 42 5. GROUTS FOR CERAMIC TILES 46 5.3 Ready-to-use paste products 48 6. SYSTEMS FOR LAYING AND GROUTING PORPHYRY AND INTERLOCKING STONE 52 7. ELASTIC SEALANTS AND ADHESIVES 57 7.3 Neutral silicone sealants 57 7.4 Hybrid sealants and adhesives 60 7.7 Accessories and primers for sealants 66 8. ADHESIVES AND FINISHING PRODUCTS FOR PARQUET 68 8.1 Adhesives...

Open the catalog to page 3

130 13. PRODUCTS FOR THE RESTORATION OF MASONRY BUILDINGS 132 13.1 Consolidating various types of weak and crumbly substrates (porous stone, brickwork, tuff, installation mortar, render, etc.) by impregnating 133 13.2 Reconditioning and consolidating masonry with free-flowing mortar 133 13.3 Consolidating masonry and render by injecting slurry 134 13.4 Horizontal chemical barriers against capillary rising damp 134 13.5 De-humidifying masonry with binders and mortars for render 137 13.6 Lime based transpirant renders 137 13.7 Structural “reinforced” renders 137 13.8 Skimming...

Open the catalog to page 4

Aquaflex Roof Plus 228 Drain Vertical/Drain Lateral 228 Dursilite Base Coat 210 Elastocolor Tonachino Plus 212 Gravel - Bardiglio Grey (2-4 mm) 120 Gravel - Carrara White (2-4 mm) 120 Gravel - Ebony Black (2-4 mm) 120 I Idrocrete DM Idrocrete S Idrosilex Idrostop Idrostop B25 Idrostop Mastic Idrostop PVC BE Idrostop PVC BI Idrostop Soft Injectors 0 23 INTO+* Isamite Isolastic Mapeair AE1 (former Mapeplast PT1) 245 Mapeband Flex Roll 236 Mapecrete Creme Protection 108 Mapecrete Stain Protection 108 Mapefast C (former Antifreeze Liquid) 245 Mapefast CF/L and...

Open the catalog to page 5

Planiprep Fast Track 11 Quarzolite Base Coat 213 Quarzolite Tonachino Plus 214 Silancolor Base Coat 215 Silancolor Cleaner Plus 215 Silancolor Paint Plus 216 Silancolor Primer Plus 216 Silancolor Tonachino Plus 217 Silexcolor Base Coat 217 Spindle for Mapei Steel Dry 191 MapePUR Easy Spray 64 MapePUR Fire Foam M 63 MapePUR Roof Foam G 64 MapePUR Roof Foam M 64 MapePUR Universal Foam G 64 MapePUR Universal Foam M 64 Mapetherm Dripnose Bead 197 Mapetiles Removable System 97 MapeWall Inject & Consolidate 134 MapeWall Muratura Fine 139 MapeWall...

Open the catalog to page 6

SCREEDS AND SMOOTHING COMPOUNDS

Open the catalog to page 8

1. SCREEDS AND SMOOTHING COMPOUNDS 1.1 Screeds ____________________________________________________________________________________ TECHNICAL DATA: Recommended mixing ratio: 350-450 kg of MAPECEM for 1 m³ of aggregates (diameter from 0 to 8 mm) and with 80-160 kg of water according to the moisture content of the inerts. Workability time: 20-30 minutes. Set to light foot traffic: after 2-3 hours. Waiting time before laying: – 3 hours for ceramic tiles and stone material; – 24 hours for resilient and wood coverings. Residual humidity after 24 hours: less than 2%. EMICODE: EC1 R Plus - very low...

Open the catalog to page 9

Topcem Pronto Ready-to-use, normal-setting, controlled-shrinkage mortar for quick-drying (4 days) screeds. EN 13813 TECHNICAL DATA: Mixing ratio: 1 25 kg bags of TOPCEM PRONTO with 1.7 litres of water. Workability time: 40-60 minutes. Set to light foot traffic: after 12 hours. Waiting time before laying: 24 hours for ceramic tiles, 2 days for natural stone and 4 days for resilient and wood coverings. Residual humidity after 4 days: less than 2%. EMICODE: EC1 R Plus - very low emission. Storage: 12 months. Application: tapping and flattening with a straight edge. Consumption: 18-20 kg/m² per cm...

Open the catalog to page 10

Nivorapid Quick-drying, thixotropic, cementitious smoothing compound for thicknesses from 1 to 20 mm, including on vertical surfaces. TECHNICAL DATA: Where to use: internal floors and walls for ceramic, natural stone, resilient and wooden coatings. Workability time: 15 minutes. Thickness applied: from 1 to 20 mm. Set to light foot traffic: approx. 2 hours. Waiting time before laying: 4-6 hours for ceramic tiiles and natural stone, 12 hours for parquet and resilient coverings. Colour: grey. EMICODE: EC1 R Plus - very low emission. Storage: 12 months. Application: metal trowel. Consumption: 1.6...

Open the catalog to page 11

Planipatch Fine-grained, ultra quick-drying, thixotropic cementitious smoothing compound for thicknesses from 0 to 10 mm, including on vertical surfaces. TECHNICAL DATA: Where to use: internal floors and walls for ceramic, natural stone, resilient and wooden coatings. Workability time: approx. 10 minutes. Thickness applied: from 0 to 10 mm. Set to light foot traffic: approx. 2 hours. Waiting time before laying: 4-6 hours for ceramic tiles and natural stone, 12 hours for resilient coverings. EMICODE: EC1 R Plus - very low emission. Colour: grey. Storage: 12 months. Application: trowel. Consumption:...

Open the catalog to page 12

1. SCREEDS AND SMOOTHING COMPOUNDS Self-levelling, ultra quick-hardening smoothing compound for thicknesses from 1 to 10 mm. LEVELLING COMPOUNDS Self-levelling, ultra quick-hardening smoothing compound for thicknesses from 1 to 10 mm, with a very low emission level of volatile organic compounds (VOC). Ultraplan Fast Track Ultra-fast drying self-levelling compound for thicknesses from 1 to 10 mm. It is suitable for restoring resilient floor which have to be ready for use in quick times. Ultraplan Maxi Self-levelling, ultra quick-hardening smoothing compound for thicknesses from 3 to 30 mm. LEVELLING...

Open the catalog to page 13

Conformity of Adesilex P4 is declared in ITT certificate n° 25070275/Gi (TUM) issued by the Technische Universität München laboratory (Germany) and as declared in ITT certificate n° 1220.6/10/R03 NPU issued by the ITB Katowice Institute (Poland) Quick-hardening cementitious levelling compound for internal and external surfaces. 1.4 Products for levelling substrates _______________________________________________________________ Smoothing mortar for internal and external walls and ceilings for thicknesses from 2 to 30 mm. IN COMPLIANCE WITH EUROPEAN STANDARD GP-CS IV RENDERING AND PLASTERING MORTAR...

Open the catalog to page 14

General Catalogue

General Catalogue

Catalog excerpts

All MAPEI catalogs and technical brochures

Archived catalogs