Multi-purpose, ready-to-use bonding promoter primer made from synthetic acrylic resin and silica inerts with a very low emission of volatile organic compounds (VOC) for render, smoothing and levelling compounds and adhesives for ceramic tiles WHERE TO USE Multi-purpose, ready-to-use primer for internal and external floors and walls. Eco Prim Grip may be used to improve the bond of all types of cement, gypsum and lime-based plasters on substrates made from concrete, brickwork, vibro-compressed concrete blocks, lightweight blocks and gypsum. Eco Prim Grip is also suitable for improving the bond of adhesives for ceramics, smoothing and levelling compounds on non-absorbent surfaces, such as ceramic, terrazzo and natural stone floors indoor. Some application examples • Application of render on concrete, brickwork, substrates, etc. • Application of smoothing and levelling compounds on old internal ceramic, terrazzo and natural stone floors. • Laying ceramic and natural stone floors directly on top of old ceramic floors. TECHNICAL CHARACTERISTICS Eco Prim Grip is a solvent-free primer composed of synthetic resin in water dispersion and selected inert materials with excellent bond strength, resistance to water and ageing. It guarantees a rough keying surface ideal for render, smoothing and levelling compounds, thus ensuring an excellent bond on smooth substrates and substrates with low absorbency, reducing and evening out absorption of water of absorbent surfaces. Once dry, it guarantees a tough bond of any cementitious render on various types of substrate: concrete, lightweight cellular cement blocks, bricks, stone, plasterboard, wood, ceramic, metal, render, gypsum, etc. Eco Prim Grip is a ready-to-use grey latex which is easy to apply using either a roller or a brush. Eco Prim Grip is non-flammable and has an extremely low emission level of volatile organic compounds (VOC). Therefore, the product is considered non-hazardous for those who use the product and final users of the environments where it is applied. It may also be stored without taking particular precautions. RECOMMENDATIONS • Apply at temperatures between +5°C and +35°C. • Do not use Eco Prim Grip in the presence of rising damp. • Eco Prim Grip is ready-to-use, no dilution is required. APPLICATION PROCEDURE Preparation of the substrate Substrates must be clean, dry, well-cured and free from oil, grease, cement laitance and loose parts. There is no need to wet the surface before applying Eco Prim Grip. 2916_eco prim grip_gb (17.05.2012 - 5ª Bozza/Ciano/PDF)

TECHNICAL DATA (typical values) PRODUCT IDENTITY Density (g/cm³): Brookfield Viscosity (mPa·s): Application of Eco Prim Grip on concrete by roller creamy liquid EC1 Plus - extremely low emission level Application temperature range: Waiting time before applying render: 15-20 minutes (dependant on substrate’s temperature and porosity) Waiting time before applying smoothing compound: 30 minutes (dependant on substrate’s temperature and porosity) Application of Eco Prim Grip on concrete by brush FINAL PERFORMANCE Resistance to solvents and oils: Resistance to acids and alkalis: Resistance to temperatures:...

Application Eco Prim Grip may be applied to the substrate with either a roller or by brush or roller. The render or smoothing and levelling compound may be applied once Eco Prim Grip is dry. The minimum waiting time is from 15 to 60 minutes according to the surrounding conditions and the absorption of the substrate. It’s possible to apply a second coat of Eco Prim Grip from the application of the first coat after a long time. Cleaning While still fresh, Eco Prim Grip may be removed easily from floors, walls and tools with water. Once dry, it must be removed with alcohol or Pulicol 2000. CONSUMPTION...

Any reproduction of texts, photos and illustrations published here is prohibited and subject to prosecution