IN COMPLIANCE WITH EUROPEAN STANDARD PI-MC-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE c yli nd r ac al a n e tiv tern atio c ote r inpplic Pr t fo l a in a pa tern ex HIGH UV RESISTANCE WIDE RANGE OF COLOURS WHERE TO USE For painting all old and new surfaces and surfaces, including those which are already painted, where both an attractive, smooth finish and a long-lasting, protective coat against environmental aggression and sun light are required. The special formulation of the product makes it particularly suitable for painting all cementitious and lime or gypsum-based surfaces which require longlasting, durable protection, good water repellence and permeability to vapour. Some application examples • Painting all types of new, well-cured cementitious or lime-based renders and old cementitious or lime-based renders which are regular, well-bonded and sound. • Painting over old paint and old plastic or mineral coatings which are well bonded to the substrate. TECHNICAL CHARACTERISTICS Colorite Performance is a paint for internal and external walls, made up of non-saponifiable, pure acrylic resin in water dispersion. Colorite Performance is resistant to all climatic conditions and the aggressive attack of smog, salt and sunlight, and provides a long-lasting protective coat for the substrate. [Finiture] 2030-colorite performance-gb (6) (05.10.2016 - Corr. PDF sito)

Colorite Performance bonds perfectly to all types of renders and to old, wellbonded paintwork. Colorite Performance is also suitable for internal use on brickwork or old painted surfaces if well-bonded and sound, after treatment with Malech. Colorite Performance protects the substrate and gives it a uniform, attractive appearance with a silky finish. It is available in a wide range of colours which may be obtained with the ColorMap® automatic colouring system. Colorite Performance meets the requirements of EN 1504-9 (“Products and systems for protecting and repairing concrete structures: definitions,...

TECHNICAL DATA (typical values) Conformity with: roduct certified according to EN 1504-2 –p (Surface protection system for concrete) – N 1504-2 classes: surface protection products E coating - ingress protection (1.3) (ZA. 1d) + moisture control (2.2) and increasing resistivity (8.2) (ZA. 1e) (C, principles PI - MC - IR) PRODUCT IDENTITY Consistency: thick liquid white, in colours from the MAPEI colour chart range or in various colours obtained using the ColorMap® automatic colouring system APPLICATION DATA Dilution ratio: Recoat time: 12-24 hours, according to temperature and humidity and, in...

chemical products. If the product is applied in a closed area, make sure that it is well ventilated. For further and complete information about the safe use of our product please refer to the latest version of our Material Safety Data Sheet. the envisaged application. In every case, the user alone is fully responsible for any consequences deriving from the use of the product. Please refer to the current version of the Technical Data Sheet, available from our web site www.mapei.com PRODUCT FOR PROFESSIONAL USE. WARNING Although the technical details and recommendations contained in this product...

PERFORMANCE CHARACTERISTICS FOR CE CERTIFICATION ACCORDING TO EN 1504-2 CLASSES ZA.1d + ZA.1e STANDARD RESULTS AND CONFORMITY TO REQUIREMENTS permeability to water vapour capillary absorption and permeability to water thermal compatibility: ageing: 7 days at +70°C in conformity (adherence ≥ 0.8 N/mm²) thermal compatibility: freeze-thaw cycles result/class: with immersion in de-icing salts in conformity (adherence ≥ 0.8 N/mm²) thermal compatibility: thunder-shower in conformity (adherence ≥ 0.8 N/mm²) thermal compatibility: thermal cycles without immersion in de-icing salts in conformity (adherence...

Any reproduction of texts, photos and illustrations published here is prohibited and subject to prosecution