CERAMIC TILING GUIDE

Adesilex P4 Mapeker Rapid-Set Flex Keraquick Latex Plus Granirapid Elastorapid Ultracolor Plus Keracolor Flex Keracolor FF Keracolor SF Kerapoxy CQ Kerapoxy Design TILING TO ELECTRIC UNDERTILE HEATING CABLES IN A BATHROOM .. 64

The World of PRODUCTS FOR BUILDING PRODUCTS FOR THERMAL INSULATION PRODUCTS FOR CEMENTITIOUS AND RESIN FLOORING PRODUCTS FOR CERAMICS AND STONE PRODUCTS FOR THE REPAIR OF MASONRY WALL PROTECTIVE AND DECORATIVE COATINGS PRODUCTS FOR UNDERGROUND CONSTRUCTION Transforming a world of project

ELASTIC SEALANTS AND ADHESIVES GRINDING AIDS FOR CEMENT PRODUCTS FOR ACOUSTIC INSULATION PRODUCTS FOR RESILIENT AND TEXTILE MATERIALS PRODUCTS FOR WOODEN FLOORING PRODUCTS FOR STRUCTURAL STRENGTHENING PRODUCTS FOR WATERPROOFING dreams and visions into reality

Certification-proof Mapei’s technologically advanced products, certified according to the most strict and demanding international standards, have always played a major part in the design and creation of large building projects, representing Italian excellence all around the world. Safe products for the environment, workers and end users. To develop eco-sustainable products, you cannot wash them green. develop You have to invest in research and have your products certified byby have to invest in research and have your products certified internationally recognized institutions. internationally recognised...

Certification-proof No need for greenwashing. You have to believe, invest in research and have your products certified by official, internationally recognised organisations to create eco-sustainable projects. Mapei does not invent certification; it is awarded to Mapei all over the world. Our products are: ^ based on the innovative R&D labs of Mapei Group ^ formulated with recycled, ultra-light material ^ with a very low VOC content and emissions ^ developed to reduce energy consumption ^ safe for the environment, installers and end users ^ manufactured locally by eco-sustainable plants Choose...

CERTIFIED QUALITY AND COMMITMENT TO THE ENVIRONMENT Mapei SpA, since 1995 has enforced the Quality System certified according to UNI EN ISO 9001. The program also entailed the since 1995 has enforced the Mapei SpA, ISO 9001 certification of many other subsidiaries in the Groupto Quality System certified according including UK9001. The program also UNI EN ISO in 2010. entailed the ISO 9001 certification of many other subsidiaries in the Group Mapei Group's main production and including UK in 2010. distribution centres enforce the Environmental Management System in accordance with the ISO 14001 and...

...beyond apparent sustainability EMAS (Environmental Management and Audit Scheme) is the EU environmental management system in accordance with the CE 761/01 regulation. EMAS (Environmental Management and Audit Scheme) is the EU environmental management system in accordance with the Mapei takes part in the CE 761/01 regulation.global Responsible Care initiative developed by the chemical industry for the chemical industry, and every Mapei takes partEnvironmental Declaration year publishes an in the global Responsible Care initiative developed by the chemical for each facility. industry for the...

Topcem Special fast drying, normal setting cement for the preparation of shrinkage controlled screeds. For the formation of bonded, unbonded, floating and heated screeds on new or existing substrates. Suitable for interior and exterior use, Topcem mixed with suitably graded aggregates and water, hardens within 24 hours, shortening project times significantly. Install ceramic tiles after just 24 hours. Install stone materials after just 2 days. Install resilient and wood materials after only 4 days. Mapecem Special fast-setting cement for the preparation of fast-drying screeds (24 hours) with...

TECHNICAL DATA: Recommended mixing ratio: 200 - 250 kg of TOPCEM with 1 m³ of aggregates (diameter from 0 to 8 mm) and 110 - 130 kg of water for dry aggregate. Workability time: 40 - 60 minutes. Set to light foot traffic: after 12 hours. Waiting time before applying floor finish: 24 hours for ceramic tiles, 2 days for natural stone and 4 days for agglomerate stone, resilient and wood flooring. Moisture level after 4 days: less than 2% w/w. Storage: 12 months. Application: pump or hand. Consumption: 2 - 2.5 kg/m² per cm of thickness. Packaging: 20 kg bags. N.B. Use in combination with PLANICRETE...

Primer G Water-based synthetic resin primer for treating gypsum or anhydrite substrates prior to installing ceramic tiles or stone material with cementitious adhesives. PRIMER G has very low emissions of VOC. For general dust suppression and reducing the absorption of very porous substrates. Suitable for use on absorbent substrates only e.g. screed, plasterboard, plaster, plywood. Eco Prim T Water-based, solvent free acrylic primer for interior use. Suitable for priming gypsum walls and suitably prepared calcium sulphate screeds. Ideal for priming before the installation of MAPEI levelling compounds. Very...

TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: neat or from 1:1 to 1:3 with water dependent on the absorption of the substrate. Drying time: 2 hours dependent on the dilution rate and the absorption of the substrate. Application: brush or roller. EMICODE: EC1 - very low emission. Storage: 24 months. Protect from frost. Consumption: 0.1-0.2 kg/m2. Packaging: 25, 10 and 5 kg drums, 1 kg bottles and 12x1 kg boxes. TECHNICAL DATA: Consistency: liquid. Colour: white. Dilution rate: neat on non-absorbent surfaces, 1:1 or 1:2 on absorbent surfaces (1:2 on anhydrite screeds). Waiting...

LEVELLING COMPOUNDS

Ultraplan Eco Ultra-fast hardening, selflevelling and smoothing compound for differences in thickness of 1-10 mm per coat. Very low VOC content. For the interior levelling of new or existing substrates that are dry and not subject to rising damp, to receive all types of floor coverings where maximum resistance to loads and traffic is required, can be trowel or pump applied. Suitable for underfloor heating. Ultraplan Maxi Ultra-fast hardening, selflevelling and smoothing compound for differences in thickness of 3-30 mm per coat. For the interior levelling of new or existing substrates, to receive all...