Polymer modified enhanced cementitious adhesive with no vertical slip and extended open time for ceramic tiles CLASSIFICATION IN COMPLIANCE WITH EN 12004 Adesilex P9 is an improved (2) slip resistant (T) cementitious adhesive (C) with extended open time (E) classified as C2TE. Adesilex P9 is CE marked, as declared in ITT certificate N° 54680102.101 (SFV) issued by the SäurefliesnerVereinigung E.V. Grossburgwedel laboratory (Germany). WHERE TO USE Interior and exterior bonding of ceramic tiles and mosaics, on floors, walls and ceilings. Also suitable for spot bonding of insulating materials such as expanded polystyrene, rock and glass wool, Eraclit® (woodcement panels), sound-deadening panels, etc. Some application examples • Bonding ceramic tiles and mosaics on the following substrates: – Conventional renders or cementitious mortar walls. – Interior aerated concrete block walls. – Gypsum or anhydrite after having first applied Primer G. – Gypsum board. – Underfloor heating installations, only with tiles less than 300x300 mm. – Cementitious screeds, as long as they are sufficiently cured and dry. – Interior painted walls, as long as the paint is firmly anchored and resistant to alkalis. • Tile on tile of existing flooring with tiles up to 300x300 mm. • Bonding small format tiles in swimming pools and basins. TECHNICAL CHARACTERISTICS Adesilex P9 is a grey or white powder composed of

cement, fine-graded aggregates, synthetic resins and special additives developed in the MAPEI Research and Development Laboratories. A mortar with the following features is obtained when mixed with water: • Easily workable. • Highly thixotropic; Adesilex P9 can be applied on a vertical surface without sagging or slipping even with heavy tiles. • Perfect adherence to all materials normally used in building. • Hardens without minimal shrinkage. • Extended open time. • Water and frost resistant. RECOMMENDATIONS Do not use Adesilex P9: • On precoat and poured concrete walls. • On walls or floors...

TECHNICAL DATA (typical values): In compliance with: European EN 12004 as C2TE DIN 18156-M European UEAIc BS 5980-1980 type 1 class AA American ANSI A 118.4 - 1999 Canadian 71 GP 30 M type 2 PRODUCT IDENTITY Type: 12 months in a cool dry place in original packaging Hazard classification according to EC 99/45: irritant. Before using refer to the “Safety instructions for the preparation and application” paragraph and the information on the packing and Safety Data Sheet Customs class: Adjustability time up to 60 minutes APPLICATION DATA at +23°C and 50% R.H. Mixing ratio: 100 parts Adesilex P9 White...

STORAGE Adesilex P9 can be stored 12 months in a normal environment in original packaging. Manufactured in compliance with the regulations of the 2003/53/EC Directive. SAFETY INSTRUCTIONS FOR THE PREPARATION AND APPLICATION Contains cement that when in contact with sweat or other body fluids produces an irritant alkaline reaction and allergic reactions to those predisposed. Use protective gloves and goggles. For further information, consult the safety data sheet. recommendations contained in this product report correspond to the best of our knowledge and experience, all the above information...