High performance white cementitious adhesive, with no vertical slip and extended open time for glass, ceramic and marble mosaic CLASSIFICATION IN COMPLIANCE WITH EN 12004 Adesilex P10 is an improved (2) slip resistant (T) cementitious adhesive (C) with extended open time (E) of class C2TE. Adesilex P10 is CE marked, as declared in ITT certificate n° 25080061/Gi (TUM) issued by the Technische Universität München laboratory (Germany) and in ITT certificates n° 2008-B-2749/13 and 2008-B-2749/16 issued by the institute MPA Dresden (Germany). WHERE TO USE Interior and exterior floor and wall bonding of: • installation of normal or heavy weight mesh-backed or paper-faced glass, ceramic and marble mosaic. Some application examples Adesilex P10: • Bonding of ceramic, glass and marble mosaic on cementitious renders, from the top towards the bottom. • Bonding mosaic on not planar substrates, without tiles slipping. • Bonding mosaic on gypsum board panels. Adesilex P10 mixed with Isolastic diluted 1:1 with water: • Bonding mosaic in swimming pools on renders or on substrates waterproofed with Mapelastic. • Internal bonding of mosaic on existing ceramic tiles.

• Bonding small sized ceramic tiles on renders in swimming pools. TECHNICAL CHARACTERISTICS Adesilex P10 is a particularly fine white powder composed of cement, graded aggregates, synthetic resins and special additives according to a formulation developed in MAPEI’s research laboratories. Adesilex P10 mixed with the correct amount of water or Isolastic becomes a mortar with the following features: • white in colour. It enhances the colours of glass mosaic tiles; • a creamy paste which is easily workable; • excellent adhesion to all conventional materials used in building; • highly thixotropic:...

TECHNICAL DATA (typical values) In compliance with: – European EN 12004 such as C2TE – European EN 12004 such as C2ES1 (if mixed with Isolastic diluted 1:1 with water) – ISO 13007-1 such as C2TE (C2ES1 if mixed with Isolastic diluted 1:1 with water) – American ANSI A 118.4 - 1999 – Canadian 71 GP 30 M type 2 PRODUCT IDENTITY Type: Bulk density (kg/m³): APPLICATION DATA (at +23°C and 50% R.H.) Mixing ratio: 32-34 parts water for 100 parts of Adesilex P10 or 17 parts water + 17 parts of Isolastic for 100 parts of Adesilex P10 very creamy Application temperature: Adjustability time: Ready for grouting...

Adesilex P10 must not be washed down or exposed to rain for at least 24 hours and must be protected from direct sunlight and frost for at least 5-7 days after the installation. GROUTING AND SEALING Wall joints can be grouted after 4-8 hours and floor joints can be grouted after 24 hours with the specific MAPEI cementitious or epoxy grouts, available in different colours. Expansion joints must be sealed with the specific MAPEI sealants. SET TO LIGHT FOOT TRAFFIC Floors are set to light foot traffic after 24 hours. READY FOR USE Surfaces are ready for use after approximately 14 days. Basins and...