System for sliding shutters WIN-SLIDE CAPACITY PER PANEL PANEL THICKNESS PANEL TYPES TRACK MOVEMENT 80 kg 20-40 mm Wood, aluminium, PVC... ALUMINIUM STRAIGHT HANGERS & ACCESSORIES Item Nr. Hanger equipped with 4 rollers, pin mounted on ball bearings, M8 stainless steel screw - 80 kg max./panel Ditto, with short screw (72 mm). 11218HCX-3 Not suitable for synchronised or motorised version 11218HCX Stainless steel plate to be screwed on edge - min. panel 20 mm Stainless steel plate to be screwed on flat side (80 x 58 mm) min. panel 30 mm 11213XA2 Stopper with stainless steel screw (adjustable force) Single-piece raw aluminium angle track in lengths of 2 / 2.5 / 3 / 4 / 5 or 6 m Raw aluminium pelmet* in lengths of 2 / 2.5 / 3 / 4 / 5 or 6 m Set of end pieces* comprising: - 2 aluminium end pieces for pelmet 11163 - 8 stainless steel 4.8 x 19 screws - 2 aluminium clips 11169 Set of 4 raw aluminium clips* to fasten the pelmet onto the track (required for pelmets more than 3 m long) For use near the sea (less than 3 km) Contact us * Available in RAL colours upon request ACCESSORIES FOR SYNCHRONIZATION OF 2 PANELS 10189 Aluminium return pulley with plastic cover Stainless steel joining bracket SLIDSOFT® : calculation software The installation instructions are available for download at www.ma

Possible configurations: Synchronized or motorized travel* Manual travel Design by VOLETS THIEBAUT Fastening pelmet with clips: Hanger example: 2 opposing manually operated shutters Hanger example: 2 opposing motorized shutters The installation instructions are available for download at www.mantion.com