System for sliding shutters WIN-SLIDE R CAPACITY PER PANEL PANEL THICKNESS PANEL TYPES TRACK MOVEMENT 80 kg - 120 kg 20-40 mm, 40-80 mm Wood, aluminium, PVC... ALUMINIUM STRAIGHT HANGERS & ACCESSORIES Item Nr. 11218HCX Description Hanger equipped with 4 rollers, pin mounted on ball bearings, M8 stainless steel screw - 80 kg max./panel 11218HCX-3* Ditto, with short screw (72 mm). 0026XA2 Stainless steel plate to be screwed on edge - min. panel 20 mm 0027XA2 Stainless steel plate to be screwed on flat side (80 x 58 mm) min. panel 30 mm 11213XA2 Stopper with stainless steel screw (adjustable force) * Not suitable for synchronised or motorised version Anodized aluminium track, 33 x 27 mm cross-section 80 kg drilled every 0.44 m, in lengths of 2 / 2.5 / 3 / 4 / 5 or 6 m. Adjustable mounting bracket 80 kg with stainless steel screws and bolts Vertical adjustment = 10 mm – Horizontal adjustment = 12 mm Joining bracket (to connect 2 tracks) Raw aluminium pelmet* in lengths of 2.5 / 3 / 4 / 5 or 6 m Set of end pieces* comprising: - 2 raw aluminium end pieces for pelmet 11163 - 8 stainless steel 4.8x19 screws - 2 raw aluminium clips 11169 Anodized aluminium pelmet* to be snapped onto track 11108 To be used for ceiling mounting. Height = 63 mm – Length = 2 / 3 or 6 m Set of 4 aluminium clips* to fasten the pelmet onto the track (required for pelmets more than 3 m long) * Available in RAL colours upon request For use near the sea (less than 3 km) Contact us Anodized aluminium track, 33 x 27 mm cross-section 80 kg drilled every 0.44 m, in lengths of 2 / 2.5 / 3 / 4 / 5 or 6 m. Dual adjustable mounting bracket 80 kg with stainless steel screws and bolts Vertical adjustment = 10 mm – Horizontal adjustment = 12 mm Dual joining bracket (to connect 2 tracks) Aluminium pelmet* - Length = 2.5 / 3 / 4 / 5 or 6 m Set of end pieces* comprising: - 2 aluminium end pieces for pelmet 11164 - 8 stainless steel 4.8x19 screws - 2 clips 11169 Set of 4 aluminium clips* to fasten the pelmet onto the track (required for pelmets more than 3 m long) * Available in RAL colours upon request SPECIAL SHADE SCREEN MOUNTING - 80 MM MAX - 120 KG 11232HCX 11312/ 11113BR 11164/ 11031/ Hanger equipped with 4 rollers, pin mounted on ball bearings, M8 stainless steel screw - 120 kg max./panel Anodized aluminium track, 37 x 28 mm cross-section 120 kg drilled every 0.30 m, in lengths of 2 / 3 / 5 or 6 m Adjustable mounting bracket with stainless steel screws and bolts for panels up to 80 mm thick and 120 kg max. (track 11312) Vertical adjustment = 10 mm – Horizontal adjustment = 25 mm Aluminium pelmet* – Length = 2.5 / 3 / 4 / 5 or 6 m Anodized aluminium pelmet* to be snapped onto track 11312 To be used for ceiling mounting. Height = 67 mm - Length = 2 or 3 m.

Possible configurations: Manual travel Synchronized or motorized travel - 1 panel - 2 panels in dual channel - 2 panels in dual channel - 3 panels in dual channel - 3 panels in dual channel - 4 panels in dual channel - 4 panels in dual channel Contact us to motorize this version: Ceiling mounting Shade screen mounting (up to 120 kg) Hanger example: 2 opposing manually operated shutters Hanger example: 2 opposing motorized shutters The installation instructions are available for download at www.mantion.com

SETS for sliding shutters WIN-SLIDE R CAPACITY PER PANEL PANEL THICKNESS PANEL TYPES TRACK MOVEMENT SET FOR 1 PANNEL - 80KG FOR OPENING UP TO 860 MM Item Nr. Set for pannels up to 80 Kg max: - 1 track 11108 L = 2 m. + Buly (spirit level) - 2 rollers 11218HCX equipped with 4 rollers, pin mounted on ball bearings, M8 stainless steel screw - 2 Stainless steel plates 0026XA2 to be screwed on edge - min. panel 20 mm - 2 Stoppers 11213XA2 with stainless steel screw (adjustable force) WSLIDE-RGV1 - 6 Adjustable mounting brackets 11113 (raw aluminium) 80 kg with stainless steel screws and bolts - Vertical...

Make your life easier by using READY-TO-INSTALL SETS WIN-SLIDE R. PRACTICAL: complete kits for 1 and 2 leaves: - 1 panel for openings up to 860 mm - 2 panels, opposite directions for openings up to 1850 mm Possible configurations: Manual travel - 1 panel Pelmets available in option Mounting with WSLIDE-RGV1: 1 panel for openings up to 860 mm Mounting with WSLIDE-RGV2 : 2 panels, opposite directions for openings up to 1850 mm The installation instructions are available for download at www.mantion.com