*myarchiexpo

TANGO

Product catalog summary

Overview: The TANGO® folding system is designed for partition and wardrobe doors, offering flexibility with configurations for 2 or 4 panels. It features a design with no lower track and minimal gaps, making it practical and easy to install for panels up to 40 kg.

Specifications: The system guarantees 100,000 cycles in accordance with European standard EN 1527. The gap between the track and panel is 20 mm, and the bottom gap between the panel and floor is 11 mm. A wood pelmet can be installed to conceal the track.

Components: The TANGO40-120 set includes an aluminium track of 1.20 m, a SAF hanger with ball bearings, upper and lower pivots, three hinges (1504C3), screws, and mounting instructions. The TANGO40-150 and TANGO40-180 sets offer similar components with longer tracks for different panel configurations.

Accessories: Accessories include sliding angle plates for wall fixing and alu-anodized pelmets available in various lengths (1.2 m, 1.5 m, 1.8 m, and 3 m). A special hinge with ball bearings is available to hold panels in the closed position and close gaps between panels.

Installation Guidelines: The width and height of panels are determined by the opening dimensions. For a 2+2 panel configuration, the panel width (Lp) is calculated as (B - 3.6 - J)/4, and for a 2-panel configuration, it is (B - 1.2 - J)/2. The panel height (Hp) is H - 64. The value 'J' varies based on panel thickness, with specific values provided for different thickness ranges.

Software Tool: The SLIDESOFT® calculation software is recommended for sizing installations to suit specific setups.

Catalog excerpts

Folding system TANGO® for partition doors and wardrobe doors for panels up to 40 Kg for partition doors or for wardrobe doors 2 or 4 panels No lower track and minimum gaps Easy to install and to operate @ SAVE TIME!!! size your installation to suit your setup with our SLIDESOFT® calculation software on: 7, rue Gay Lussac - ZI de Trépillot - F-25000 Besançon - Tél. +33 3 81 50 56 77

Open the catalog to page 1

Folding system TANGO® for partition doors and wardrobe doors TANGO SET Set for 2 panels including: 1 aluminium track of 1.20 m (SAF) 1 SAF hanger (ball bearings) with plate TANGO40-120 1 upper pivot 1 lower pivot 3 hinges 1504C3 Screws and mounting instructions. TANGO40-150 Dito with a track of 1.50 m Set for 4 panels* including: 1 aluminium track of 1.80 m (SAF) 2 SAF hangers (ball bearings) with plate TANGO40-180 2 upper pivots 2 lower pivots 6 hinges 1504C3 Screws and mounting instructions. *NB : 2 panels on each side of the opening (2 + 2) 8 aluminium track 8 upper pivot Gear to guide 2 panels....

Open the catalog to page 2

TANGO

TANGO

Catalog excerpts

All MANTION SAS catalogs and technical brochures