Straight sliding system for wooden doors CAPACITY/DOOR TRACK Description Set including: - 1 gear CADETT - 1 track 2525F/185 Set including: - 1 gear CADETT - 1 track 2526F/185 (aluminium - 1.85 m) - 1 Buly (spirit level) GEAR CADETT TRACKS Galvanized track, 27 x 24.5 mm, drilled and countersunk every 110 mm in length of 1.55 m. Ditto in length of 1.85 m. Ditto in length of 6 m. Raw aluminium track, 26 x 25 mm, drilled and countersunk every 110 mm in length of 1.85 m. GEAR CADETT Gear including: - 2 rollers 0222 supplied with 2 plates 0026 and 0021 - 2 end stops 1097 -  guide 1103 - Screws, spanner and mounting instructions CADETTE roller mounted on a RILSAN ring, supplied with plates 0026 and 0021 Side fixing plate with tapped hole Ø M8 Height: 40 mm - width: 40 mm For panels over 18 mm thickness Top fixing plate with tapped hole Ø M8 Length: 75 mm - width: 20 mm For panels over 20 mm thickness Ditto width of 15 mm instead 20 mm. For panels of 16 mm and 19 mm thickness Mortising plate for roller fixing. End stop for track 2525. Polyamide guide - Screwing type for channel of 6x18 mm. Wall fixing bracket for track 2525 supplied with screws, nuts and washers. Height: 17 mm - Length: 22 mm - Thickness: 20/10e Wall fixing bracket for track 2525 supplied with screws, nuts and washers. Height: 23 mm - Length: 30 mm - Thickness: 30/10e Wall-fixing bracket for twinned tracks 2525 supplied with screws, nuts and washers. Height: 34 mm - Length: 47 mm - Thickness: 30/10e 40 KG GALVANIZED STEEL (2525F) ALUMINIUM (2526F) STRAIGHT

40 Kg Sliding system with adjustable rollers, for indoor or outdoor use. • The pendant bolt can be swivelled in any direction. This enables quick mounting and adjustment at any time • Silent and smooth running thanks to a nylon roller mounted on a self-lubricating ring. • Can be mounted with single or double tracks pendant bolt Bracket 2529 for panels from 25 to 40