1. Catalogs
  2. Manitowoc Foodservice
  3. Walk-in Coolers & Freezers
video corpo
cad

Walk-in Coolers & Freezers

Walk-in Coolers & Freezers

Walk-in Coolers & Freezers

Product catalog summary
Overview
This document outlines the specifications and features of Kolpak's walk-in coolers and freezers, emphasizing modular design, insulation, and construction standards.
General Specifications
  • Panel Sizes: Standard nominal size panels with customizable full-size options.
  • Insulation: 4-inch thick urethane insulation for superior energy efficiency.
  • Assembly: Posi-loc assembly for quick alignment and sanitation.
  • Gaskets: Double PVC gaskets for a secure fit, eliminating caulking.
  • Design Features: Coved "T" panels and corners for sanitation and reduced frost conduction.
  • Door Jambs: Patented FRP material to minimize thermal conductivity.
  • Finishes: Options include galvanized steel, aluminum, and stainless steel.
Code Approvals and Standards
Kolpak products comply with standards from the National Sanitation Foundation, Underwriter’s Laboratories, and Factory Mutual.
Panel Fabrication and Construction
  • Interchangeable panels for easy assembly and expansion.
  • Standard panel widths of 2' and 4', with various heights.
  • Foamed-in-place urethane insulation with a K factor of 0.138.
Floor Construction
Options include heavy-load floor panels or floorless designs with vinyl screeds.
Entrance Door and Accessories
  • Standard 34" x 78" swing-type door with magnetic gasket and safety release.
  • Includes vapor-proof light, digital thermometer, and non-skid threshold.
Refrigeration Equipment
Available systems include self-contained and pre-assembled remote systems, with air-cooled or water-cooled condensers.
Warranty
10-year limited warranty on panels, 18-month warranty on painted surfaces, and 1-year warranty on hardware and electrical components.
Additional Features
Includes interior safety release, vapor-proof interior light, and durable FRP threshold.
Kolpak Walk-in Features and Options
  • Airshield Option: Minimizes air infiltration, saving energy.
  • Interior Ramp: Facilitates wheel-in traffic with a heated threshold.
  • Super Door Construction: Features cam-action hinges and ergonomic handle for efficiency.
  • Thermometers: Optional dial and standard digital thermometers for temperature monitoring.
  • Outdoor Roof Cap: Moisture-tight seal with a 10-year warranty.
  • Heated Air Vent: Standard in freezers to ease door operation.
Insulation and Floor Recommendations
  • Insulation Thickness: Two layers of urethane sheets for different temperature needs.
  • Floor Load Capacity: Standard floors support up to 700 lbs/sq ft.
  • Floorless Vinyl Screeds: Suitable for tile or cement floors.
  • Temp-guard Vinyl Screeds: Provide insulation and sanitation benefits.
Refrigeration Systems
  • CS Model: Top-mounted, self-contained system.
  • SS Model: Side-mounted, self-contained system.
  • PCL Model: Remote condensing unit with pre-charged lines.
  • PR Model: Pre-assembled remote system.
Refrigeration Capacities
Models offer capacities from 5,080 BTU/hr to 44,200 BTU/hr.
Company Information
Kolpak is part of Manitowoc Foodservice, providing high-quality refrigeration solutions.
See more

Catalog excerpts

Walk-in Coolers & Freezers-1

WALK-INS • Walk-in Coolers & Freezers • Refrigerated Systems • Refrigerated Warehouses Specified #1 in Cold Food Storage

 Open the catalog to page 1
Walk-in Coolers & Freezers-2

Exactly What You Need To Specify "A" Quality Walk-in Cooler/Freezer Choose Kolpak modular walk-ins. Full size or nominal size walk-in coolers, freezers, or dual-temp units can easily be assembled in any size from Kolpak's modular panels. To enlarge or relocate, disassembly is equally as easy. The modular concept makes Kolpak walk-ins, quick and simple to install. Precision formed panels with urethane insulation are lightweight and easy to handle. All sections have tongue and groove joints for a better, more secure fit. On the average, two men can assemble an 8' x 10' walk-in cooler or freezer...

 Open the catalog to page 2
Walk-in Coolers & Freezers-3

Nominal Size (NS) Walk-ins FLOOR SIZE FLOOR SIZE Walk-in coolers or freezers provided under this portion of the specifications shall be prefabricated, of modular design and construction. They shall be designed to allow convenient and accurate field assembly and future enlargement by the addition of panels. Standard wall, ceiling, and floor panels shall be nominal 2' and 4' in width and shall be interchangeable with like panels. Standard heights of walk-ins shall be_____. Corner panels shall be 90° angles with actual 12" exterior horizontal measurements. Nominal 1 and 3' panels shall be used if...

 Open the catalog to page 3
Walk-in Coolers & Freezers-4

Specifications Continued 26 GA Embossed Galvanized (Standard)_ 26 GA Embossed Galvanized Pre-painted White 26 GA Embossed Galvanized Pre-painted Beige 26 GA Embossed Galvanized Pre-painted Brown .032 Embossed Aluminum (Standard)_ .032 Embossed Aluminum Pre-painted White 22 GA Stainless Steel - 430 Rolled On_ 20 GA Stainless Steel - 430 Rolled On_ OTHER: Available upon request b. Exterior floor and ceiling shall be 26 gauge galvanized steel on all walk-ins, unless c. Interior floor, shall be one of the following: 2.16 gauge stainless steel. 3. .100 tread plate aluminum 4.16 gauge Galvanized steel...

 Open the catalog to page 4
Walk-in Coolers & Freezers-5

More Features Easy-to-install membrane roof cap provides an excellent moisture-tight seal, keeping water off exterior installations. Reflects sunlight to lock the cold in, heat out. Covered by a 10 year limited warranty. (Optional feature for outdoor walk-ins). vent permits opening door with fingertip ease, eliminating freezer compartments. The Digital Thermometer (Standard) The digital thermometer is used to monitor the interior temperature of the Kolpak walk-in cooler or freezer. It is equipped with a remotely wired sensor to provide accurate temperature readings from -40 degrees F to +199...

 Open the catalog to page 5
Walk-in Coolers & Freezers-6

Floor Construction Recommended insulation thickness For built-in floor applications (floorless with concrete or tile and grout), Kolpak recommends two layers of 1" thick urethane sheets be used for medium-temperature walk-ins (35°F or above). For lowtemp units (below 35°F), we suggest two layers of 2" thick urethane sheets. Joints must be staggered for maximum efficiency. Maximum floor load Stationary floor loads up to 700 lbs. per square foot uniformly distributed can be stored on Kolpak standard floor sections. If mobile equipment such as dollies and carts are used, the floor must be reinforced...

 Open the catalog to page 6
Walk-in Coolers & Freezers-7

Medium Temperature Hermetic R-22 Medium Temperature Semi-hermetic R-22 Top mounted, self-contained, factory assembled requiring only electrical connections and drain line by jobsite contractors. System shall have quick disconnect lines for easy, economical jobsite installation. Side mounted, self-contained, factory assembled requiring only electrical connection and drain line by jobsite contractors. All components are factory mounted on a frame for mounting over walk-in wall. Consists of condensing unit assembly, evaporator assembly, and pre-charged refrigerant lines for remote location of condensing...

 Open the catalog to page 7
Walk-in Coolers & Freezers-8

High quality, innovative solutions that fulfill all your “cold-side” needs. Manitowoc Foodservice is comprised of eight brand names. For beverage products – Servend, Multiplex, and McCann's; for ice products – Manitowoc Ice; and for refrigeration products – Kolpak, McCall, Harford, and Koolaire. Visit us today at www.manitowocfsg.com We are committed to protecting the environment and its resources. For up-to-date product data always view an electronic version on our web site. 3149D ©2009 Kolpak 3/09 Continuing product improvement may necessitate change of specifications without notice. KOLPAK...

 Open the catalog to page 8

Archived catalogs

  1. Walk-ins

    2  Pages

  2. Cleveland

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.