*myarchiexpo

MHT 14350

1 / 5 PagesView full catalog

MHT 14350

Product catalog summary

Technical Specifications:

Max Capacity: 35,000 kg (77,162 lbs)
Load Centre of Gravity: 1,200 mm (47.244 in)
Max Lifting Height: 13.6 m (44 ft 7 in)
Max Reach: 8.5 m (27 ft 11 in)
Unladen Weight: 69,000 kg (152,119 lbs)
Ground Clearance: 0.69 m (2 ft 3 in)
Wheelbase: 5.7 mm (0.224 in)
Overall Dimensions: Length 10.93 m (35 ft 10 in), Width 3.53 m (11 ft 7 in), Height 3.82 m (12 ft 6 in)
Tilt Angles: Down 107°, Up 15°
Turning Radius: External 7.32 m (24 ft), With Forks 10.07 m (33 ft)
Forks Dimensions: 2400 mm x 300 mm / 135 mm (94.488 in x 11.811 in / 5.315 in)
Frame Levelling Corrector: 8°

Tires and Steering:

Standard Tires: 24.00 R35
Steering Modes: 2 wheel steer, 4 wheel steer, Crab mode

Engine:

Brand: Mercedes
Model: OM 936 LA
Norm: Stage IV / Tier 4 Final
Cylinders: 6 - 7200 cm³ (439.37 in³)
Power: 350 Hp / 260 kW
Max Torque: 1600 Nm@1600 rpm
Cooling System: Water
Battery Capacity: 24 V / 180 Ah

Transmission:

Type: Hydrostatic with Powershift
Gears: 3 forward / 3 reverse
Max Speed: 25 km/h (15.5 mph)
Brakes: Automatic Negative Hand-brake, Hydraulic Service Brake

Hydraulics:

Pump Type: Load sensing pump
Flow - Pressure: 400 l/min - 350 Bar

Tank Capacities:

Engine Oil: 29 l (7.66 US gal)
Hydraulic Oil: 760 l (200.79 US gal)
Fuel Tank: 720 l (190.22 US gal)
Diesel Exhaust Fluid: 63 l (16.64 US gal)

Noise and Vibration:

Noise at Driving Position: 80 dB(A)
Environmental Noise: 107 dB(A)
Vibration on Hands/Arms: < 2.5 m/s

Miscellaneous:

Safety Cab: ROPS - FOPS cab (level 2)
Controls: JSM
Attachment Recognition System: Standard

Additional Information:

This document provides an overview of the MHT 14350 model, including its specifications and capabilities. The information is subject to change without notice, and the actual product may vary. For further details, contact your Manitou dealer.

Catalog excerpts

Technical sheet :

Open the catalog to page 1

Capacities Max. capacity Load centre of gravity Weight and dimensions Unladen weight (with forks) Length to face of forks Overall width Overall height Tilt-down angle Tilt-up angle Ground clearance External turning radius (over tyres) Outer turning radius (with forks) Forks length / width / section Frame levelling corrector tires Standard tyres Number of rear wheels Steering wheels (front / rear) Drive wheels (front / rear) Steering mode 2 wheel steer, 4 wheel steer, Crab mode 2 wheel steer, 4 wheel steer, Crab mode Engine Engine brand Engine norm Stage IV / Tier 4 Final Stage IV / Tier 4 Final...

Open the catalog to page 2

Dimensional drawing

Open the catalog to page 3

Load chart Load Chart metric Machine on stabs with forks LC 600 mm Metric

Open the catalog to page 4

This brochure describes versions and configuration options for Manitou products which may be fitted with different equipment. The equipment described in this brochure may be standard, optional or not available depending on version. Manitou reserves the right to change the specifications shown and described at any time and without prior warning. The manufacturer is not liable for the specifications given. For more information, contact your Manitou dealer. Non-contractual document. Product descriptions may differ from actual products. List of specifications is not comprehensive. The logos and visual...

Open the catalog to page 5

MHT 14350

MHT 14350

Catalog excerpts

All Manitou America's, Inc. catalogs and technical brochures