*myarchiexpo

MHT 12330

1 / 5 PagesView full catalog

MHT 12330

Product catalog summary

Technical Specifications:

Max Capacity: 33,000 kg (72,753 lbs)
Load Centre of Gravity: 1,200 mm (47.244 in)
Max Lifting Height: 11.92 m (39 ft 1 in)
Max Reach: 6.6 m (21 ft 8 in)

Weight and Dimensions:

Unladen Weight: 49,000 kg (108,027 lbs)
Ground Clearance: 0.59 m (1 ft 11 in)
Wheelbase: 4.9 m (16 ft 1 in)
Overall Dimensions: Length 8.37 m (27 ft 6 in), Width 2.98 m (9 ft 9 in), Height 3.6 m (11 ft 10 in)

Engine:

Brand: Deutz
Model: TCD 6.1 L6
Power: 245 Hp / 180 kW
Torque: 1000 Nm @ 1450 rpm

Transmission:

Type: Hydrostatic with Powershift
Gears: 3 forward / 3 reverse
Max Speed: 25 km/h (15.5 mph)

Hydraulics:

Pump Type: Load sensing pump
Flow - Pressure: 310 l/min - 350 Bar

Tank Capacities:

Engine Oil: 21 l (5.55 US gal)
Hydraulic Oil: 570 l (150.59 US gal)
Fuel Tank: 600 l (158.52 US gal)

Noise and Vibration:

Noise at Driving Position: 80 dB(A)
Environmental Noise: 107 dB(A)

Miscellaneous:

Safety Cab: ROPS - FOPS cab (level 2)
Controls: JSM
Attachment Recognition: Standard

Additional Information:

This document provides an overview of the MHT 12330 model by Manitou, including its specifications and capabilities. The equipment may vary based on configuration and options. For further details, contact a Manitou dealer.

Catalog excerpts

Technical sheet :

Open the catalog to page 1

Capacities Max. capacity Load centre of gravity Weight and dimensions Unladen weight (with forks) Length to face of forks Overall width Overall height Tilt-down angle Tilt-up angle Ground clearance External turning radius (over tyres) Outer turning radius (with forks) Forks length / width / section Frame levelling corrector tires Standard tyres Number of front wheels / rear wheels Steering wheels (front / rear) Drive wheels (front / rear) 2 wheel steer, 4 wheel steer, Crab mode 2 wheel steer, 4 wheel steer, Crab mode Steering mode Engine Engine brand Engine norm Stage 5 / Tier IV Final Stage...

Open the catalog to page 2

Dimensional drawing

Open the catalog to page 3

Load chart Load Chart metric Rough terrain load chart (EN 1459 B) Metric Machine on tyres with jib Metric

Open the catalog to page 4

This brochure describes versions and configuration options for Manitou products which may be fitted with different equipment. The equipment described in this brochure may be standard, optional or not available depending on version. Manitou reserves the right to change the specifications shown and described at any time and without prior warning. The manufacturer is not liable for the specifications given. For more information, contact your Manitou dealer. Non-contractual document. Product descriptions may differ from actual products. List of specifications is not comprehensive. The logos and visual...

Open the catalog to page 5

MHT 12330

MHT 12330

Catalog excerpts

All Manitou America's, Inc. catalogs and technical brochures