*myarchiexpo

MHT 10130

1 / 6 PagesView full catalog

MHT 10130

Product catalog summary

Technical Specifications:

Max Capacity: 13,000 kg (28,660 lbs)
Load Centre of Gravity: 600 mm (23.622 in)
Max Lifting Height: 9.65 m (31 ft 8 in)
Max Reach: 5.17 m (17 ft)

Weight and Dimensions:

Unladen Weight: 18,490 kg (40,763 lbs)
Ground Clearance: 0.44 m (1 ft 5 in)
Wheelbase: 3.37 mm (0.133 in)
Overall Width: 2.51 m (8 ft 3 in)
Overall Height: 2.99 m (9 ft 10 in)
Cab Width: 0.93 m (3 ft 1 in)
Tilt Angles: Down 117°, Up 18°
Turning Radius: 5.34 m (17 ft 6 in)

Tires and Steering:

Standard Tires: Aeolus - A2237 - 17.5 R25
Wheel Configuration: 2 front, 2 rear
Steering Modes: 2 wheel steer, 4 wheel steer, Crab mode

Engine:

Brand: Mercedes
Model: OM 934 LA. E4-3
Power: 176 Hp / 129 kW
Torque: 750 Nm @ 1600 rpm
Cooling System: Water
Batteries: 2 x 12 V / 120 Ah

Transmission:

Type: Hydrostatic
Gears: 2 forward, 2 reverse
Max Speed: 31 km/h (19.3 mph)
Brakes: Automatic Negative Hand-brake, Oil-immersed multi-discs
Gradeability: 34%

Hydraulics:

Pump Type: Variable pump
Flow and Pressure: 180 l/min - 300 Bar

Tank Capacities:

Engine Oil: 21 l (5.55 US gal)
Hydraulic Oil: 290 l (76.62 US gal)
Fuel Tank: 315 l (83.22 US gal)
Diesel Exhaust Fluid: 63 l (16.64 US gal)

Noise and Vibration:

Noise at Driving Position: 80 dB(A)
Environmental Noise: 107 dB(A)
Vibration: < 2.5 m/s

Miscellaneous:

Safety Cab: ROPS - FOPS cab (level 2)
Controls: JSM
Attachment Recognition: Standard E-Reco

Additional Information:

This document provides an overview of the MHT 10130 model, including its specifications and configurations. The equipment may vary based on the version and options selected. For further details, contact a Manitou dealer.

Catalog excerpts

Technical sheet :

Open the catalog to page 1

Capacities Max. capacity Load centre of gravity Weight and dimensions Unladen weight (with forks) Overall width Overall height Tilt-down angle Tilt-up angle Ground clearance Wheelbase External turning radius (over tyres) Outer turning radius (with forks) Forks length / width / section tires Standard tyres Number of front wheels / rear wheels Steering wheels (front / rear) Drive wheels (front / rear) 2 wheel steer, 4 wheel steer, Crab mode 2 wheel steer, 4 wheel steer, Crab mode Steering mode Engine Engine brand Engine norm Stage IV / Tier 4 Final Stage IV / Tier 4 Final Engine model Number of...

Open the catalog to page 2

Dimensional drawing

Open the catalog to page 3

Load chart Machine on tyres with forks LC 1200 mm Metric Machine on tyres with forks LC 1200 mm Imperial Machine on tyres with jib Metric Machine on tyres with jib Imperial

Open the catalog to page 4

Machine on tyres with platform Metric Machine on tyres with platform Imperial

Open the catalog to page 5

This brochure describes versions and configuration options for Manitou products which may be fitted with different equipment. The equipment described in this brochure may be standard, optional or not available depending on version. Manitou reserves the right to change the specifications shown and described at any time and without prior warning. The manufacturer is not liable for the specifications given. For more information, contact your Manitou dealer. Non-contractual document. Product descriptions may differ from actual products. List of specifications is not comprehensive. The logos and visual...

Open the catalog to page 6

MHT 10130

MHT 10130

Catalog excerpts

All Manitou America's, Inc. catalogs and technical brochures