*myarchiexpo

Catalogs
Mageba
VIBRAX®SYSTEM 6

VIBRAX®SYSTEM 6

Product catalog summary

Introduction
The VIBRAX®SYSTEM 6 is designed for impact sound insulation, offering specialized consulting services to ensure optimal application. Early involvement in planning can prevent costly errors.

Material Specifications

Two-layer compound with rubber granules and rubber mat bonded with PU elastomer.
Weight: 2,600–3,600 g/m².
Thickness: Approximately 6 mm (±0.3 mm).
Roll dimensions: Width 1,000 mm (±1.5%), Length 10,000 mm (±1.5%).
Surface: Smooth with granulate structure; Undersurface: Open, loose granular texturing.
Color: Black.

Technical Characteristics

Static range of use: 0.05 N/mm² (EN 826).
Deflection: 20% at 0.01 N/mm².
Dynamic stiffness: Less than 35 MN/m³ for 6 mm thickness (EN 29052).
Temperature resistance: –30°C to +80°C.

Impact Sound Improvement

Δ LW: 21 dB for single layer below 55 mm screed, 110 kg/m².
Δ LW: 24 dB for single layer below 80 mm screed, 179 kg/m².
Maximum improvement under screed: ≤ 24 dB.

Installation Components

Floor covering (PU or other).
Edge strip (e.g., VIBRAX®SYSTEM 6).
Adhesive, screed, PE-membrane, balancing soil, concrete floor.

Contact Information
mageba sa, Solistrasse 68, 8180 Bülach, Switzerland. Phone: +41 44 872 40 50, Email: [email protected], Website: www.mageba.ch

Catalog excerpts

Impact sound insulation Impact sound improvement under screed: < 24 dB floor covering (PU or other floor covering) adhesive screed i. a. balancing soil concrete floor Technical characteristics (1) Values for impact sound improvement A Lw and dynamic stiffness depending on the material thickness, screed thickness and general flooring used mageba Switzerland www.mageba.ch Make use of our specialists on impact sound insulation The subject matter experts from the mageba team are happy to guide you through the process of choosing your best fit. We offer a specific application engineering consulting for an ideal impact sound insulation. Our team takes i. e. sound engineering requirements, existing or planned flooring systems or floor coverings and the necessary screed thicknesses in consideration to assure a holistic product offering. Our experience proofed that our involvement in the early planning phase can avoid errors. Such errors are likely to lead into cost-intensive mark-up solutions that could be avoided upfront. 2018.05CH-EN ©mageba mageba sa - Solistrasse 68 - 8180 Bulach - Switzerland - T +41 44 872 40 50 - [email protected]

Open the catalog to page 1

All Mageba catalogs and technical brochures

Archived catalogs

mageba repair and replacement services for modular expansion joints
4 Pages