Expansion joints mageba expansion joints – for lasting driving comfort TENSA®CRETE Type RE and RE-LS easy to install, noise-reducing, durable

Expansion joints Features & Benefits Introduction The TENSA®CRETE type RE and RE-LS single-gap joint systems are expansion joints for gap widths up to 80 mm for the RE type and 100 mm for the RE-LS type (these values can vary depending on the construction standard). Type RE-LS is also equipped with a noisereducing surface in the form of “sinus plates”. This results in noise reduction of up to 80 %. The steel edge profiles of the TENSA®CRETE expansion joints are anchored in ROBO®FLEX waterproof polymer concrete. The joints are suitable for new constructions as well as for refurbishment projects....

Expansion joints Material properties & Installation Materials Installation process The following high-quality materials are used for the production of the TENSA®CRETE expansion joints: After uncovering the recess – by removing the previously laid asphalt layer or the old joint - the further steps for the installation of TENSA®CRETE expansion joint are as follows: • Steel profile made of S 235 grade • EPDM sealing profile • Polymer concrete consisting of epoxy resin, hardener and special mineral filler Corrosion protection The steel profiles are primed with anticorrosion coating in accordance...

Expansion joints Quality & support Quality For five decades, mageba expansion joints have proven their worth in thousands of structures under the most demanding conditions. In addition to the product properties, the extensive experience of our well-qualified manufacturing and installation staff also contributes to the high quality and durability of the products. mageba has a process-orientated quality system that is certified in accordance with ISO 9001:2008. Quality is also regularly inspected by independent institutes, such as the materials testing body (MPA) of the University of Stuttgart....