Catalogs >
Mageba >
LASTO ® WALL E

LASTO ® WALL E
2Pages

Catalog excerpts

Bearing Surfaces Soundproofing layer for preventing longitudinal transmission of structure-borne sound in walls Principle The LASTO®WALL E soundproofing layer combines a high load capacity with optimal deflection properties thanks to the small amount of travel. Settling is reduced to a minimum, and permanently elastic solid rubber provides a high degree of protection against mechanical stresses during construction. This effectively prevents the formation of acoustic bridges and eliminates the risk of rising damp. Ensure that layer width is at least 30 mm more than width of wall. LASTO®WALL E Concrete slab LASTO®WALL E below wall section LASTO®WALL E soundproofing layers are suitable for use where protection against sound is especially important. This is usually the case in living or sleeping areas, conference rooms or offices. In order to ensure that plastering does not create acoustic bridges for structureborne sound the layer must be 30 mm wider than the wall. Sections should be butt-joined and then taped. Pipe and cable ducts should be insulated using LASTO®ISOPIPE. Deflection graph for LASTO®WALL E Technical data bearing pressure 3 mm solid rubber strip

Open the catalog to page 1

2 Product programme and references Tender specifications Level bearing surface Supply and seamless laying of a permanently elastic solid rubber soundproofing layer on a level surface with approx. 15 mm projection beyond walls to be plastered; taped joins. Uneven bearing surface Supply and seamless laying of a permanently elastic solid rubber soundproofing layer on a load-bearing mortar bed with approx. 15 mm projection beyond walls to be plastered; taped joins. type: perm. maximum load: width: supplier: type: perm. maximum load: width: supplier: LASTO-WALL E 5 N/mm2 200 mm mageba sa CH-8180...

Open the catalog to page 2