Catalogs >
Mageba >
LASTO®FLONPAD GP

LASTO®FLONPAD GP
4Pages

Catalog excerpts

High-quality sliding point bearings for precise, low-friction transmission of loads to the supporting structure The principle The LASTO®FLONPAD, which allows movement in all directions, is a high-quality single-point sliding bearing for building and civil engineering work. It is used to absorb fairly large movements with as little friction as possible, and has a low installed height. The bearing consists of a PTFE coated elastomeric load-bearing core and a steel sliding plate resting on it. To ensure minimum friction, this plate has a specially treated, smooth surface. Thanks to the low friction between these high-quality bearing components, the excellent sliding action is maintained permanently and reliably. Installing the point bearings Application areas The LASTO®FLONPAD is used wherever permanent lowfriction point support is needed. Bearing dimensions can be chosen freely to ensure that loads are transmitted accurately into the supporting structure. LASTO®FLONPAD provides high quality support for floor/ceiling slabs on walls, columns, brackets and for prestressed ceilings. It is an ideal support bearing for structural steelwork and timber structures, pipelines, machinery and reservoirs or water tanks. Up to sliding plate dimensions of 1000mm x 2000mm, any size can be supplied.

Open the catalog to page 1

Technical data table LASTO®FLONPAD Type GP 6 PTFE, smooth PTFE, with lubricant dimples Base material Core thickness Thickness of sliding plate Installed height Sliding surface Permissible load Friction values Contact pressure [N/mm2] Friction value Intermediate values obtainable by linear interpolation Displacement The standard displacement value for LASTO®FLONPAD sliding bearings, both longitudinally and transversely, is ± 25mm. The sliding plate is 60mm longer and wider than the rubber/PTFE element of the bearing. The sliding plate is always longer than the supporting core by the amount...

Open the catalog to page 2

Bearing construction, specimen dimensions 3 Cover strip Bearing construction Width of bearing Width of sliding plate Overall width Installed height (8 / 11 mm) Core thickness (6 / 9 mm) Length of bearing Length of sliding plate Overall length Foam surround PTFE supporting core Ordering data If bearing dimensions have been finalised: 1. Core width and length (LB x LL x D) 2. Sliding plate width and length (PB x PL ) 3. Overall width and length (AB x AL ) 4. Pre-setting values (if any) 5. Number of bearings If bearing dimensions have not been finalised: 1. Max. applied load [kN] 2. Movement...

Open the catalog to page 3

4 Text for tenders, references Text for tenders Supply and installation of a ready-to-install PTFE sliding point bearing capable of movement in all directions, with a 2 mm stainless steel sliding plate. Supply and installation of a ready-to-install PTFE sliding point bearing capable of movement in all directions, with a 2 mm stainless steel sliding plate. Type: Displacement: Max. permissible load: Installed height: Load-bearing core (LB x LL): Sliding plate (PB x PL): Installed dimensions (AB x AL): Supplier: Type: Displacement: Max. permissible load: Installed height: Load-bearing core (LB...

Open the catalog to page 4