Catalogs >
Mageba >
LASTO ®FLONBLOCK

LASTO ®FLONBLOCK
4Pages

Catalog excerpts

--Certified with the CE mark. Certified with the CE mark. --Design according to EN 1337-3. Design according to EN 1337-3. A high-quality knuckle and sliding point bearing for low-friction load transmission to the supporting structure. Principle LASTO®FLONBLOCK Type Ga are reinforced elastomeric bearings with a Teflon -PTFE sliding layer vulcanised onto one side. The Teflon surface is matched with a sliding plate made from buffed stainless steel, with a specially-treated smooth surface texture, designed to achieve minimum friction coefficients. LASTO®FLONBLOCK knuckle and sliding point bearings are used to absorb high vertical loads, torsion of the bearing surfaces, and horizontal displacements in the longitudinal and transverse directions with the minimum possible friction. Installation as a sliding point bearing LASTO®FLONBLOCK Type Ga can be used wherever the displacements of the structure generate restoring forces that are too large, or where the range of permissible displacements of LASTO®BLOCK bearings is not sufficient. Despite a low bearing height, the sliding layer permits significant displacements. The forces to be absorbed are transmitted properly to the supporting structure, and rotations are absorbed through elasticity. LASTO®FLONBLOCK knuckle and sliding point bearings deliver high-quality support in building construction, civil engineering, bridge construction, steel, wood and concrete structures, and in prefabricated construction.

Open the catalog to page 1

2 Load and Dimensions Table Foam frame Sliding plate with stainless steel Bearing width Sliding plate width External width Installation height Thickness of elastomeric block Elastomeric bearing with Teflon PTFE sliding layer Bearing length Sliding plate length External length Thickness of sliding sheet Cover band Table of technical data Load Elastomeric block Sliding sheet Installation dimensions Bearings for load and displacement ranges other than those given here can be requested from us at any time.

Open the catalog to page 2

Technical Details and Installation Instructions 3 Standards and External Quality Control The LASTO®FLONBLOCK elastomeric bearings described in this document conform with the European standard EN 1337-3 and have successfully passed all tests required for the CE mark. In addition to internal quality control, LASTO®FLONBLOCK elastomeric bearings are also regularly monitored in accordance with regulations by MPA Stuttgart, an independent supervisory board officially recognised in the field of construction. The role of external quality control is to monitor our own internal quality control...

Open the catalog to page 3

Tender Delivery and installation of an installation-ready, free-sliding Teflon PTFE sliding point bearing with a 2mm stainless steel sliding plate. LASTO®FLONBLOCK Type Ga ±25mm 180kN 100mm x 200 x 30mm 210mm x 260 x 2mm 230mm x 280 x 32mm mageba sa CH-8180 Bülach Tel.: +41-44-872 40 50 Fax: +41-44-872 41 29 Email: hochbau@mageba.ch www.mageba.ch Type: Displacement: Load Nd: Load core (LB x LL x D): Sliding plate (PB x PB x h): Installation size (AB x AL x H): Supplier: Reference Projects Mont Terri Tunnel, St. Versanne Paul Klee Institute, Bern Swing, Wallisellen Motorway bridge Moosgasse,...

Open the catalog to page 4