• Power: 4 Watt
• Ingress Protection: IP68
• Cable: H05RN-F 1m Included
• Material Options: Black/White/Bronze Powdercoated, Natural Copper, 316 Stainless Steel
• Hexcell Louvre: Available
• Lens Cover: Clear and Frosted
• Removable Light: Pin Mounted
• Engine: 4W Cree XHP50 Chip
• Colour Temperature: Warm White (2700K, 3000K), Neutral White (4000K), Cool White (5000K)
• Optic Degrees: 12°, 26°, 36°, 74°
• CRI: 90+ CRI
• Efficiency: 90lm/w
• Input: 700mA Constant current (Remote), 12V AC (Integral)
• Warranty: 5 Years Electronics, 5 years Aluminium, 10 years Copper and Stainless Steel
• Load Rating: 5000kg/11000lbs for Stainless Steel, Copper, Aluminium
• LED Shield: LED Bypass Shunt, LED Reverse Polarity Protection

The M4 Uplighter offers beam angles of 12°, 26°, 36°, and 74°.

The M4 luminaire range is powered by a 4 watt LuxR light engine, providing a variety of LED colours. It is designed for high-quality accent lighting with energy efficiency and durability, suitable for public spaces, large projects, and residential areas. The replaceable LED system uses Cree LED chips for consistent colour temperature across all luminaires.

For recessed installation, use mounting canisters. Core a hole in a wall or cast the canister in place, then push the fitting into the canister, secured by a silicon wiper seal.

To replace components, remove the luminaire, unscrew the flange, and replace with factory LuxR parts to ensure proper operation. Reassemble in the correct order for water tightness and correct light output.

Recessed mounting canisters are available. Refer to the canister spec sheets for more information.

• Remote Driver Wired in Series: Series wiring allows a single driver to power multiple fittings in a daisy chain, simplifying the wiring scheme.
• Integral Driver + Transformer: In a parallel circuit, LuxR fittings can be wired in parallel to existing or new installations using a wire wound or magnetic transformer.