LuxR M4 Steplight
2Pages

{{requestButtons}}

Catalog excerpts

LuxR M4 Steplight - 1

SLS steplight with slot s/steel aluminium black bronze white ACAN aluminium canister SCAN security canister DCAN deck canister AFMC aluminium floor mount canister WCCAN wall/ceiling mount canister Please specify powdercoat colour when ordering an aluminium luminaire SPECIFICATIONS Power 4 Watt Ingress Protection IP68 Rating Material - Black/ White/Bronze Powdercoated - Natural Copper - 316 Stainless Steel Removable Light Pin Mounted Engine 4W Cree XHP50 Chip Colour Temperature Warm White - 2700K and 3000K Neutral White - 4000k Cool White - 5000k Efficiency 90lm/w - Delivered from Luminaire with unobstructed beam Input 700mA Constant current (Remote) Warranty Electronics Warranty 5 Years Body Warranty 5 years Aluminium. 10 years Copper and Stainless Steel Load Rating Stainless Steel 3500kg/7700lbs LED Shield LED Bypass Shunt LED Reverse Polarity Protection ACCESSORIES Recessed mounting canisters (Please refer to the canister spec sheets for more information) www.luxrled.com Copyright 2018 LuxR Limited - V2 May 2018

Open the catalog to page 1
LuxR M4 Steplight - 2

Steplight with Slot RECOMMENDATIONS Using the mounting canisters will make recessed installation of this product simple. Core a hole in an existing wall or cast the canister in. Once in place, simply push the fitting into the canister. The luminaire will be retained by a silicon wiper seal REPLACING COMPONENTS Firstly remove the luminaire from its recessed location. Unscrew the flange paying close attention to the assembly order or refer to the diagram below. Locate the item that needs to be replaced, it is imperative you replace the component with factory LuxR parts to ensure...

Open the catalog to page 2

All LuxR catalogs and technical brochures

  1. LuxR V1 Spec

    2 Pages

  2. M4 RGBW

    4 Pages