Specifications:
The M1 Uplighters are powered by a 1 Watt LuxR light engine with a variety of LED color options. It features an ingress protection rating of IP68, ensuring durability and waterproofing. The materials used include black, white, and bronze powder-coated finishes, natural copper, and 316 stainless steel. The light engine uses a 1W Cree XPG-3 Chip with color temperatures ranging from warm white (2700K, 3000K) to cool white (5000K), including red, green, blue, and amber options. Optic degrees available are 10°, 15°, 20°, and 30° with clear and frosted lens covers. The luminaire delivers an efficacy of 80lm/w with a CRI of 90+.

Power and Warranty:
The input is 350mA constant current (remote) or 12V AC (integral). The electronics warranty is 5 years, with the body warranty extending to 5 years for aluminum and 10 years for copper and stainless steel. The load rating is 4000kg/8800lbs for stainless steel and copper, and 3500kg/7700lbs for aluminum.

Beam Angles and Wiring:
The luminaire supports remote driver wiring in series, allowing a single driver to power multiple fittings. Alternatively, an integral driver with a transformer can be used for parallel wiring. This flexibility accommodates various installation scenarios.

Replacing Components:
To replace components, remove the luminaire from its recessed location, unscrew the flange, and replace with factory LuxR parts to ensure proper operation. Reassemble carefully to maintain water tightness and correct light output.

Recommendations:
For recessed installation, use PVC or aluminum mounting canisters. Core a hole in an existing wall or cast the canister in place, then push the fitting into the conduit hole, secured by a silicon wiper seal.

Accessories:
PVC and aluminum recessed canisters are available for simplified installation.