RELAX-NI-LI light rope
2Pages

LLLLLLLL LLLLLLLL LUX ELEMENTS® LLLLLLLB DATA SHEET Page 1/2 LUX ELEMENTS®-RELAX-NI-LI light rope Reviewed on: 02/2021 CAUTION: Only an authorised qualified electrician may install the wiring and connect the power supply. The applicable national regulations of the country in which the installation takes place must be observed (in Germany this is the VDE, among others)! Technical data RELAX-NI-LI RELAX-NI-LI (LREL8207) - light rope (warm white) for RELAX-NI-M/L/XL, loose, including hard foam support element (d=10 mm) with milling for on-site installation Dimensions: Light rope material: Colouring: Ambient temperature: Light power: Protection class: Power consumption: Connection voltage: Connection type: Cable length: 11 x 16 x 270 mm Two-component silicone warm white -20 to +65 ° Celsius 351 lumen IP 65 3,9 Watt 24 Volt Supply cable with plug 5,0m Product processed in accordance with the ESD directive and delivered ready to plug in - removal of the plug will lead to loss of the warranty! Technical data - CONCEPT-LL-N30 CONCEPT-LL-N30 (LCONLL4801.N30) - accessories for the RELAX-NI-LI: LED power supply unit Power supply unit 20 Watt, input 230 Volt, with round plug incl. connecting cable Dimensions: 178 x 43 x 25 mm Ambient temperature: -20 to +55 ° Celsius CAUTION! Guarantee only if lead seal is intact. A maximum of five LREL8207 light ropes can be connected to a power supply unit with the aid of Y-cables. Dimmable with Optotronic dimmers.

DATA SHEET LUX ELEMENTS®-RELAX-NI-LI light rope Reviewed on: 02/2021 Replace DS from: 09/2017 Technical data cabling n Y-cable – Y-cable for warm white with 2 outputs (LCONBALL4805.Y2.WW) 2 outputs, 2-pole, cable length 250 mm Y-cable for warm white with 2 outputs – Y-cable for warm white with 3 outputs (LCONBALL4805.Y3.WW) 3 outputs, 2-pole, cable length 250 mm n Extension cable – Extension cable 1 m for warm white (LCONBALL4806.WW.1) Y-cable for warm white with 3 outputs – Extension cable 7 m for warm white (LCONBALL4806.WW.7) Product processed in accordance with the ESD directive and...