PB_FLOOR-WHF_EN

Product catalog summary

Overview: The LUX ELEMENTS®-FLOOR-WH F is a hard foam support element designed for installing underfloor heating pipes beneath ceramic surfaces. It is suitable for water heating systems with a pipe diameter of 16 mm and can be used on both wooden floors and mineral substrates like concrete or screed.

Key Features:

Installation and insulation combined in one element.
Low installation heights, making it ideal for renovations.
Quick and easy installation with no need for screed, resulting in short drying times.
Adaptable to various room situations and allows rapid heating due to direct heat dissipation into the ceramic covering.

Installation Guidelines:

For FLOOR-WH F 30, full surface adhesive application is required.
FLOOR-WH F 50 can be installed using dot adhesion with a spacing of ≤ 200 mm, but full coverage is necessary for wooden floors.

Product Specifications:

FLOOR-WH F 30: Dimensions 1250 x 600 x 30 mm, Article Number LFLOOR1000.
FLOOR-WH F 50: Dimensions 1250 x 600 x 50 mm, Article Number LFLOOR1001.

Packaging Details:

FLOOR-WH F 30: 52 pieces per pallet, covering 39 m², pallet dimensions 1250 x 1200 x 900 mm, weight 3.8 kg per unit.
FLOOR-WH F 50: 32 pieces per pallet, covering 24 m², pallet dimensions 1250 x 1200 x 920 mm, weight 4.4 kg per unit.

System Components:

Reinforcement fabric: LUX ELEMENTS®-ARM-600.
Fixing adhesive: LUX ELEMENTS®-COL-AK, with specific consumption rates for different applications.
Sealing film: LUX ELEMENTS®-DRY-DF, with additional sealing filler LUX ELEMENTS®-DRY-ASK for wet rooms.

Material Consumption:

Fixing adhesive for full surface bonding: approx. 2.8 kg/m².
Fixing adhesive on dots (FLOOR-WH F 50 only): approx. 6 – 10 kg/m² per cm installation height.
Filling empty heating grooves: approx. 4.5 kg/m².
Filling grooves with heating pipes: approx. 2 kg/m².
Reinforcement with fabric or sealing film: approx. 2 kg/m².
Sealing filler for ceramic coverings: approx. 2.6 kg/m² for two-layer application.
Filling overlaps of sealing film: approx. 0.2 kg/m.

Catalog excerpts

Construction panel for underfloor heating LUX ELEMENTS ®-FLOOR-WH F … … is suitable for use on either wooden floors or mineral substrates such as concrete or screed. Using FLOOR-WH F 30 the fixing adhesive must always be applied over the full surface, FLOOR-WH F 50 can also be placed on dots (dots spacing ≤ 200 mm). For wooden floors, full coverage adhesion is always required. Hard foam support element with milling for installing underfloor heating pipes under ceramic surfaces – suitable for water heating with pipe diameter 16 mm ½ Installation and insulating element in one ½ Low installation heights – ideal for renovations ½ Quick and easy installation – short drying times, no screed necessary ½ Simple to process – for adaptation to room situation ½ Rapid heating of the room … due to direct heat dissipation into the c

Open the catalog to page 1

LUX ELEMENTS GmbH & Co. KG ■ An der Schusterinsel 7 ■ D - 51379 Leverkusen ■ Tel. +49 (0) 21 71/ 72 1 2 - 0 ■ Fax +49 (0) 21 71/ 72 12 40 ■ [email protected] ■ www.luxelements.com Reprinting and duplication, even partial, only with the permission of LUX ELEMENTS GmbH & Co. KG ■ subject to technical alterations

Open the catalog to page 2

All LUX ELEMENTS catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list