DATA SHEET Page 1/2 Heating fleece LUX ELEMENTS®-RELAX-BA HE-E / LUX ELEMENTS®-RELAX-BA HE-E L / LUX ELEMENTS®-SPA CAB-HE E-BA Product Description The heating fleece is a foil heating system with optimised radiant heating that is designed for walls, ceilings and floors, is very thin and guarantees extremely fast direct surface heating of individual areas. Technical data Heating fleece Rated power Rated voltage Length of connecting cable Dimensions fleece W x H x L Material Transformer Rated power Rated voltage primary Rated voltage secondary Length of supply cable Dimensions L x W x H Internal safety temperature switch Internal transformer fuse Protection class Weight Ambient temperature Connections 162 W/m2 (80 W/m) 36 V 1000 mm 490 x 0,4 x Installation length in mm PET film with carbon fibres and fillers 300 W 230 V AC 50/60 Hz 36 V 2000 mm with European flat plug 134 x 91 x 100 mm 110 ° C automatically resetting exchangeable fine-wire fuse T 2,0 A IP40 3,4 kg max. 40 ° C Quick push terminals 1,0 mm2 to 4,0 mm2 Processing instructions The heating fleece is generally suitable for the subsequent making of holes with a maximum size of 70 mm. The minimum distance of 50 mm between the holes and 20 mm to the copper conductors must be observed. The copper strips on the heating fleece must not be damaged or cut. In the case of penetrating installations, make sure that non-conductive materials such as plastic boxes, wall plugs, etc. are used. Please note that screws may only be introduced into the heating surface if they are installed with plastic wall plugs for electrical insulation. In addition, two screws must not be connected with an electrically conductive material (e.g. metal shelves, shower head bars made of metal). Do not use nails.

LLLLLLLL LUX ELEMENTS® LLLLLLLB DATA SHEET Page 2/2 Heating fleece Resistance values as a function of lenght: * Deviation of approx. 15 % of the measured values, see measurement record General Notes The connection diagram for the connection of the heating fleece as well as the temperature sensor integrated in the component to the temperature controller (LUX ELEMENTS' -ADD-EH ZB) can be found in the separate assembly instructions. Several heating mats can be connected to one power supply unit; please observe the maximum rated power of the power supply unit. The power supply unit and the controller...