product specifications RA2 Select Lamp Dimmer RA2 Select lamp dimmers are simple to install and easy to use. Lamp dimmers allow floor and table lamps to be added to a system quickly and easily using Clear Connect RF Technology. They can conveniently be hidden behind furniture. RA2 Select lamp dimmers use Lutron patented Clear Connect RF technology which provides reliable, wireless communication with other RA2 Select devices. Each lamp dimmer can be controlled individually using a Pico wireless control. Using a RA2 Select main repeater allows devices to be part of a whole house solution that can be controlled remotely from anywhere in the world. Features • The lamp dimmer is trailing-edge capable of 1 W minimum load and up to 150 W or 1 A maximum of LED and 200 W of incandescent or halogen loads. • Allows remote control from anywhere in the space when paired with Pico wireless controls. • When used with the RA2 Select main repeater, the lamp dimmer can be programmed via the Lutron App* to incorporate lighting scenes and schedule daily events. Also, the lamp dimmer can be controlled from anywhere in the world. Model Number Country /  Region 434 MHz Limited Hong Kong • To maximize energy savings and provide hands-free operation, the lamp dimmer can be turned on / off automatically via Radio Powr Savr occupancy / vacancy sensors. * he Lutron app is required for setup and use with the RA2 Select main repeater. The Lutron app is compatible with iOSR devices T version 8.0 or later and AndroidT devices version 4.0 or later. ** See Colors on page 6.

product specifications RA2 Select Lamp Dimmer Specifications Power Typical Power Consumption < 0.5 W Test conditions: Load and LED are off Communication Frequency Regulatory Approvals Ambient operating temperature: 0 °C to 40 °C (32 °F to 104 °F), 0% to 90% humidity, non-condensing. Indoor use only. RA2 Select plug-in modules communicate with the system through Radio Frequency (RF). They must be located within 18 m (60 ft) line-of-sight or 9 m (30 ft) through walls of a Pico wireless control, Radio Powr Savr sensor, or RA2 Select repeater. Tested to withstand electrostatic discharge without damage...

product specifications RA2 Select Lamp Dimmer Dimensions All dimensions are shown as: mm (in). Images below are for reference only. Side View Front View Cord Length Receptacle Cord Length 500 (20) Plug Cord Length 1000 (40)

product specifications RA2 Select Lamp Dimmer Installation Plug the load cord into a lamp dimmer receptacle. Insert the plug of the lamp dimmer into the wall outlet. Lamp dimmer Load cord Lamp dimmer plug Lamp dimmer receptacle Load Capacity Voltage Load Types 1 A 200 W – Incandescent, halogen LED 1 A 150 W – LED * DEL NOTE: The lamp dimmer is designed to dim one incandescent, LED, or tungsten halogen table or floor lamp. Use with lighting loads only. It is recommended to plug the lamp directly into the dimmer receptacle and not through a multi-plug adaptor, power strip, or extension cord. Do...

product specifications RA2 Select Lamp Dimmer Operation Lamp Dimmer Single LED   Green – links when load is toggled B Flashes during association Red – Blinks when error Toggle Button Press to toggle ON / OFF (goes to last level) Radio Powr Savr sensor 9 m (30 ft) maximum Main repeater Radio Powr Savr sensor Pico wireless control Lamp dimmer Wireless repeater Lamp dimmer All devices must be located within 9 m (30 ft) of a repeater. The range can be extended with up to four RA2 Select wireless repeaters (Lx-REPPRO).

product specifications RA2 Select Lamp Dimmer Model Numbers RR x- P20 -240x-x x Frequency / Channel Code Plug Type Frequency / Channel Code K = 868 MHz Q = 434 MHz Limited Plug Type G = Type G; UK; BS 1363 F = Type F; EU; Plug = CEE 7 / 7; Socket = CEE 7 / 3 Color BL = Black AW = Arctic White Lutron, Clear Connect, RA2 Select, Radio Powr Savr, and Pico are trademarks or registered trademarks of Lutron Electronics Co., Inc. in the US and/or other countries. All other product names, logos, and brands are property of their respective owners.