Quantum Brochure
13Pages

{{requestButtons}}

Catalog excerpts

Quantum Brochure - 1

Quantum total light management Quantum total light management Save electricity and protect the environment Reduces greenhouse gases by eliminating unnecessary energy use Save money Lowers operating costs and peak demand charges Create a more flexible space Lighting and shading zones can be re-configured without rewiring Increase productivity and comfort Makes occupants more productive and comfortable with preferred light levels and automated shade control www.lutron.com/quantum World Headquarters 1.610.282.3800 Technical Support Center 1.800.523.9466 (Available 24/7) Customer Service 1.888.LUTRON1 ©04/2010 Lutron Electronics Co., Inc. Improves comfort and productivity while saving energy

Open the catalog to page 1
Quantum Brochure - 2

“We designed our building to use 1.28 watts per square foot of lighting power. With Quantum , it’s only using 0.38 — that’s 70% less.” The challenge: Optimize electric light and daylight to save energy and create a productive, comfortable, visual environment. Most buildings today are over-lighted because there is enough daylight in the space; or lights are set to a higher level than appropriate for the people inside; or spaces are lighted even though they are unoccupied. This wastes energy, creates discomfort, and reduces productivity. Glenn Hughes, Director of Construction for The New York...

Open the catalog to page 2
Quantum Brochure - 3

Benefits of Quantum total light management ™ Save electricity and protect the environment Save money More electricity is used for lighting than any other building system. Controlling your lighting is usually the easiest and most visible way to manage your energy costs while enhancing your space. Lower operating and maintenance costs. • automatically turn off lights in vacant spaces • use only the amount of electric light needed • minimize electricity demand charges by lowering light levels during peak periods • reduce lighting and HVAC loads by dimming lights and automatically controlling...

Open the catalog to page 3
Quantum Brochure - 4

Key components of Quantum total light management EcoSystem electric lighting controls ® Sivoia QS daylight controls ® GRAFIK Eye QS scene and zone controls ® Quantum hub and power panels ™ Quantum software Quantum total light management ™ Sample office building floor using Quantum components for efficient electric light and daylight management. Conference room Keypad Control Private office Shades • reduce glare and solar heat gain for increased comfort, productivity, and energy savings while preserving views Quantum Hub Smart Panel QS • connects all Quantum Power Supply system components •...

Open the catalog to page 4
Quantum Brochure - 5

How the components connect together Building ethernet network communication link Power panel link (RS-485) EcoSystem® loop Sensor connection Open office Ecosystem® Open office areas Interior office Private office Ecosystem ballasts Perimeter office Private office Ecosystem ballasts with Ecosystem To GP/LP dimming panel loads: To XP switching panel loads: (hallways, restrooms, stairwells) power supply Incandescent loads

Open the catalog to page 5
Quantum Brochure - 6

Quantum energy savings and light control strategies ™ Architectural load dimming Allows the users to dim traditional light sources such as incandescent, halogen, low voltage, and LED. Fluorescent dimming Highly efficient dimming that allows the users to dim fluorescent light down to 1% of full light output. Scheduling Lights turn off or are dimmed and shades are adjusted automatically at certain times of the day or in relation to sunrise and sunset. Switching Allows the user to switch on or off all non-dimmed light sources using 1 million cycle relays. Daylight harvesting Automatically...

Open the catalog to page 6
Quantum Brochure - 7

Controllable window shades Lighting energy saved Lighting energy used Daylight harvesting Hyperion™ solar-adaptive shading Personal light control Energy use in an open office area with Quantum total light management High-end trim Using occupancy sensors, daylight sensors, controllable shades, timeclocks, and/or manual controls, Quantum™ reduces lighting energy usage by approximately 60%. Occupancy or vacancy sensing Light level sets maximum light level energy saved Light Level energy saved energy used energy used Security/facility staff enter: Shades automatically open to let daylight into...

Open the catalog to page 7
Quantum Brochure - 8

Hyperion solar-adaptive shading TM Hyperion is an available feature for QuantumTM that adjusts Sivoia QS shades throughout the day based on the sun's position. This provides effective daylighting while reducing solar heat and glare to maximize the comfort and productivity of building occupants. HyperionTM adjusts shades to accomodate for the position of the sun in the sky throughout the day and throughout the year. Precise shade adjustment schedules are developed by combining information gathered about the building with user-specified limits on sunlight penetration and amount of time...

Open the catalog to page 8
Quantum Brochure - 9

Q-Admin software highlights Beyond light control to light management The heart of the QuantumTM solution is Q-Admin—Quantum's powerful software that allows facility managers to manage their electric light and daylight for maximum energy efficiency comfort, and productivity. From a central location, a facility manager can not only control electric lights and shades but also configure, monitor, analyze, and report on the light in an entire building. V Contra! I Occupinci I , Dirligtang I El»i*nr*l Ciostt Wait _ BKtricH ClCrtH WtJt C*m*>r - Partdbppad Capftrapct RODITIS hiMillMr't 1 fhMiwi...

Open the catalog to page 9
Quantum Brochure - 10

Q-Admin software highlights IntelliDemand M load shed Allows facility managers to shed a percentage of the system's lighting output to reduce energy costs for their facility. This can result in lower electricity rates or rebates from utility companies, who often request reductions in electricity levels when peak load conditions threaten to cause a blackout. With Q-AdminT„ software, simply set the percentage reduction in light level and instantly load shed your entire facility or particular space from its current power level. ^ C antrc-l h ^onrlDring _ Hvparti . Admlnlilriboa EoeiwOsaoc...

Open the catalog to page 10

All LUTRON ELECTRONICS catalogs and technical brochures

  1. myRoom Prime

    3 Pages

  2. brochure_1

    6 Pages

  3. palladiom

    7 Pages

  4. lumaris

    4 Pages

  5. finire

    4 Pages

  6. lutron

    30 Pages

  7. HomeWorks QS

    36 Pages

  8. C?L Dimmers

    4 Pages

  9. Volume 3

    708 Pages

  10. Volume 2

    476 Pages

  11. Volume 1

    234 Pages

  12. Serena

    24 Pages

Archived catalogs

  1. Homeworks

    3 Pages

  2. LCP128

    6 Pages

  3. AURORA

    6 Pages

  4. Power Panels

    48 Pages

  5. Sivoia QED

    32 Pages