Centralised Lighting Control System
66Pages

{{requestButtons}}

Catalog excerpts

Centralised Lighting Control System - 1

Performance specifications3.1How to lay out a system3.2 Overall wiring3.3 Overview3.4 Processor panels3.5 eLumen > TM Manager3.6eLumen software3.7 Graphic design service3.8 System interfaces3.9 Wallstations3.10Control units3.11Control interfaces3.12 Theatrical control interfaces3.13Accessories3.14Window treatment wallstations3.15seeTouch > TM model guide3.16Schedules3.17 >

Open the catalog to page 1
Centralised Lighting Control System - 5

Astronomical time clock Power failure memory > The time of sunrise and sunset changes daily.An astronomical time clock allowsevents to be initiated around sunrise and/or sunset,whereas standard time clocks allow events to be initiated only at set times. The benefits The benefits > Initiate events based on sunrise and sunset or at fixed times. Minimises the inconvenience of power service interruptions and keeps buildinglights as you left them once power is restored. Recommended specifications Recommended specifications > Central lighting control processor shall have an integral real and...

Open the catalog to page 5
Centralised Lighting Control System - 11

The Sivoia QEDInterface,which connects to both the Sivoia QEDcommunication link and the controlstation device link,is used for programming and operating the group of window treatments wired to thecontrol.Each Sivoia QEDinterface occupies one address on the control station device link. Daylight sensor inputs andtimeclock events can be used to select Sivoia QEDcontrollable window treat- ments presets. Sivoia QEDlink Wire type C Sivoia QEDinterface,pg.3.15.2 24 VACpower supply24 VACpower supply Sivoia QEDroller blinds One group of Sivoia QEDcontrollable window treatments moving simultaneously...

Open the catalog to page 11
Centralised Lighting Control System - 12

Designed to manage all lighting in a buildingՕEasily interfaces with audio/visual equipment,stage,security,and buildingmanagement systemseLumenՙManager includes easy-to-understand,Windows > -based DesignITΙfor system design and setupBuilt-in astronomical time clock allows scheduling of events up to ayear in advanceՕOptional built-in modem and RS-232 Interface simplifies remoteaccess and system integrationAutomatic sequencingՕPartitioned space control combines/separates lighting scene control to reflect the partition status of movable wallsConditional logicՕButton-by-button programmingGroups...

Open the catalog to page 12
Centralised Lighting Control System - 19

ProductModel Level One Graphics > Simple buttons for you to control the lights in an area.Graphics are static Օ8operational buttons per page Level One Starter PackEL-GRPH-L1-S > 8custom-designed graphics pagesՕPictureIT software license,EL-SFT-PIC Each Additional Level One PageEL-GRPH-L1-PLevel Two Graphics > Simple buttons foryou to control the lights in an area.You can click on the selected area and control a new set of scenes via buttons.8operational buttons per pageՕ8navigation points per page Level Two Starter PackEL-GRPH-L2-S > 8custom-designed graphics pagesՕPictureIT software...

Open the catalog to page 19
Centralised Lighting Control System - 21

Ordering example- W:127 mm (5.00)H:197 mm (7.75Ԕ) D:64 mm (2.50)Mounts onP/N 241496 W:105 mm(4.13Ԕ)H:105 mm(4.13) D:40 mm(1.57Ԕ) > NTOMX-62J -WH Use every 610 m (2,000Ւ) to boost power and data signalsIncrease number of system power panels by 32ՕExpand power panel or control station devices (CSD) link up to 2,400 m(8,000) using up to three power and data repeaters > Add colour/finish suffix tomodel # Matt finishes Ships in 48 hrs.WhiteWHIvoryIVBeigeBE GreyGR BrownBR BlackBL Dimensions W:38 mm (1.50Ҕ)H:145 mm (5.69) D:22 mm (0.88Ԕ) > Metal finishes Dimensions Connects external RS-232 device...

Open the catalog to page 21
Centralised Lighting Control System - 23

Ordering example > 2,3 OMX-VDC-LB -WH SCENES Add colour/finish suffix tomodel # Area: AuditoriumScene:Rehearsal12:44PMPAGE 1 OF 1PreshowIntermissionRehearsalSpeakerVideoNight LightClean upAll off 2,3 Navigation buttons provide direct access to scenes,zones,and spaces in a single processorՕHELP & SYSTEM button accesses context-sensitive help screensPassword-protected setup menus offer access to configuration andadvanced features such as Area Setup,Unlock Areas,and LanguagesՕMounts in Lutron > Matt finishes Ships in 48 hrs.WhiteWHIvoryIVBeigeBE GreyGR BrownBR BlackBL SCENESZONESAREASHELP...

Open the catalog to page 23
Centralised Lighting Control System - 29

(3) 1.00mm > 2 Use low voltage PELV (Class 2) wiring to connect the contact closure inputs to the control station device (#18 AWG) (3) 1.00 mm CommonInput 2Input 1 > ՕInputs must be dry contact closure or common referenced solid-state outputs:Dry contact closure:-Rated voltage:10 VDC when open -Rated current:0.5 mA when closedSolid-state Output:-Open collector (NPN) referenced to common (Terminal C) -On-state saturation voltage less than 2 VDC at 0.1 mA-Off-state leakage current less than 50 A at 5 VDC-Control station device is miswire protected up to 36 VDC -Outputs must stay in the closed...

Open the catalog to page 29
Centralised Lighting Control System - 30

2,3,4 Ordering example W:70 mm (2.75)H:116 mm (4.56Ԕ) D:27 mm (1.06) ԕTypical functions (configured through software):-Recall preset light levels for two scenes -Reflect position status of two movable walls -Enable/disable control station devices -Start/stop one sequence -Enable/disable time clock -Security override Scene 1 -Fine-tune zones > NTOMX-2B-SL -WH 1 Add colour/finish model # Matt finishes Wallbox:P/N 241218W:50 mm(2.00)H:100 mm(4.00Ԕ) D:63 mm(2.50) > Ships in 48 hrs.WhiteWHIvoryIV BeigeBE GreyGR BrownBR BlackBL Metal finishes Ships in 4-6 weeks.Bright BrassBBBright ChromeBC...

Open the catalog to page 30
Centralised Lighting Control System - 32

2,3,4 Ordering example W:86 mm (3.38)H:86 mm (3.38Ԕ) D:22 mm (0.88) ԕTypical functions (configured through software):-Recall preset light levels for two scenes -Reflect position status of two movable walls -Enable/disable control station devices -Start/stop one sequence -Enable/disable timeclock -Security override Scene 1 -Fine-tune individual zonesMounts in European wallbox (Lutron > EOMX-2B -WH 1 Add colour/finish suffix tomodel # Matt finishes Ships in 48 hrs.WhiteWHBlackBL Metal finishes ծ P/N 241683) > Ships in 4-6 weeks.Bright BrassBBBright ChromeBCBright NickelBNSatin BrassSB Satin...

Open the catalog to page 32
Centralised Lighting Control System - 34

NTOMX-KP5 -WH 1 ԕTypical functions (configured through software):-Recall preset light levels for four scenes plus off -Fine-tune light levels -Recall five scenes plus off and full-onAmber status LEDs standard > Add colour/finish to model # Matt finishes Wallbox:P/N 241218 W:50 mm(2.00Ք)H:100 mm(4.00) D:63 mm(2.50Ԕ) > Standard,Ships in 48 hrs.WhiteWHIvoryIVBeigeBEGreyGRBrownBR BlackBL Metal finishes Dimensions > 2,3,4 Ships in 4-6 weeks.Bright BrassBBBright ChromeBC Bright NickelBN Satin BrassSB Satin ChromeSC Satin NickelSN Antique BrassQB Antique BronzeQZAnodised AluminiumClearCLABlackBLA...

Open the catalog to page 34

All LUTRON ELECTRONICS catalogs and technical brochures

  1. myRoom Prime

    3 Pages

  2. brochure_1

    6 Pages

  3. palladiom

    7 Pages

  4. lumaris

    4 Pages

  5. finire

    4 Pages

  6. lutron

    30 Pages

  7. HomeWorks QS

    36 Pages

  8. C?L Dimmers

    4 Pages

  9. Volume 3

    708 Pages

  10. Volume 2

    476 Pages

  11. Volume 1

    234 Pages

  12. Serena

    24 Pages

Archived catalogs

  1. Homeworks

    3 Pages

  2. LCP128

    6 Pages

  3. AURORA

    6 Pages

  4. Power Panels

    48 Pages

  5. Sivoia QED

    32 Pages