PRODUCT SPECIFICATIONS Architectural Resin Panels NATURAL | GRASSES & REEDS | COASTAL FADE CO A S TA L ™ FA D E W 0% H 25% 50% 75% Standard Décor Direction SCALE | 3½" x 3½" 9 x 9 cm VERTICAL SCALE | 8" x 8" 20 x 20 cm SCALE | 48" x 96” 122 x 244 cm ADD-ONS ABOUT Coastal grasses in natural green, yellow and brown tones. Cultivated from sustainable crops. Heavy coverage of material creates a feeling of privacy. Scale images based on approximate size of 48" x 96" sheet. (1092 x 2438 mm) PRODUCT SPECIFICATIONS GAUGES* LC LF ChemShield ™ | A film barrier used to increase the chemical resistance of Lumiclear panels. (3 mm) • • (4 mm) • Illume ™ | Adding Illume to the back of a panel provides a soft light diffusion. 1/16" .060" (1.5 mm) 1/8" .118" 5/32" .160" .196" (5 mm) • • 1/4" .236" (6 mm) • • 3/8" .354" (9 mm) • • 1/2" .472" (12 mm) • • 3/4" .708" (18 mm) • • 1" .944" (24 mm) • • Standard: 48" x 96" (1219 x 2438 mm) • • Oversize: 48" x 120" (1219 x 3048 mm) Available Sizes 3/16" • • • • Design Oversize: 59" x 120" (1499 x 3048 mm) Standard Finishes $ Price Group Décor Direction 100% OPAQUE Satin / Satin Marker Board ™ | A high quality dry erase finish that can be added to any Lumicor panel. Opaque ™ | An opaque backing on Lumiclear or Lumiform creates a fully opaque panel. UV Block ™ | An additional layer of protection from ultraviolet light. Lumiguard ™ | A high-performance resin with anti-microbial technology and enhanced chemical resistance applied to any Lumiclear panel. OPACITY | Based on approximate amount of light showing through the panel. All natural décors are produced using a hand applied technique. Layout and coverage will vary slightly from sheet to sheet due to the artisan nature of the manufacturing process. Some products use natural materials that can change color over time and will vary in size, shape, color and texture within a single sheet. Colors may vary with harvest season. Vertical Available in R4® certied recycled resin. C KEY | LC = Lumiclear LF = Lumiform • = Option Available *Not all décors are available in every gauge and may vary by resin. Gauge tolerance is ± 10%. LINKS LEARN MORE ABOUT ADD-ONS TO ORDER: 1.888.LUMICOR | www.lumicor.com Images are for reference only and may not exactly represent the nal product. Material, color, density or scale may vary based on the artisan nature of the product. FIND A REPRESENTATIVE NEAR YOU VISIT LUMICOR.COM © Copyright Lumicor 2011 - All Rights Reserved April 21, 2011 1:46 PM Coastal Fade Prod. Spec. Sheet - v.2

PRODUCT SPECIFICATIONS NATURAL | GRASSES & REEDS | COASTAL FADE STANDARD FADE LAYUP 96” 244 cm 72”-96” (183-244 cm) No decor 84” 213 cm 72” 183 cm 48”-72” (122-183 cm) End fade 40-20% densit 60” 152.4 cm 48” 122 cm 24”-48” (61-122 cm) Begin fade 60% density 36” 91.5 cm 24” 61 cm 0”-24” (0-61 cm) Full Density 12” 30.5 cm 12” 30.5 cm TO ORDER: 1.888.LUMICOR | www.lumicor.com Images are for reference only and may not exactly represent the nal product. Material, color, density or scale may vary based on the artisan nature of the product. 24” 61 cm 36” 91.5 cm 48” 122 cm © Copyright Lumicor 2011 -...