EDL-M
2Pages

monopoint downlight z series DESCRIPTIoN A Aiming 3 axes of adjustment; 360° self-locking pan; tilt up to 90° from vertical locks via thumbscrew; lampholder may be rotated and locked in any position via thumbscrew for precise lens/ accessory positioning B Spotlight Available with open face (M1), with kick reflector for wallwashing (M2), with full cowl for tight beam control (M3), or with angle-cut cowl (M4); optional AMEC endcap minimizes backlight (37W max halogen lamp only); standard arm length is 83mm, consult factory for custom lengths up to 457mm C Mounting Fitting is compatible with standard mounting options (zero-sightline application shown) D Effects Devices Frosted glass lens included; internal coil-spring accommodates up to 3 total effects devices E Retention Torsion spring clips accommodate varying ceiling thicknesses (up to 25mm) and ensure snug fit of trim against ceiling Technical MOUNTING See page 2 CONSTRUCTION Spotlight: Machined aluminum; painted finishes are granulated powdercoat listing ETL/ C-ETL listed for dry/damp locations; IP10 rated Housing: Steel lamp MR-16 style lamp: 12V halogen 50W max (37W max with AMEC end cap). warranty Manufacturer’s one year warranty guarantees product(s) listed to be free from defects in material workmanship under normal use and service. Warranty is conditional upon use of manufacturer supplied transformer or ballast. To ensure optimal results, it is recommended to specify lamps supplied by Lucifer Lighting* (see page 2) ordering information Example: EDL-M2-SL-W-W EDL SERIES Open Face Wallwasher Full Cowl Angle-Cut Cowl SPOTLIGHT FINISH Standard Length Custom Length** FACEPLATE FINISH Aluminum Matte White* Matte Black* **Custom arm lengths specified in 1/2 inch increments from 4” (102mm) to 18” (457mm); Example: CL14 specifies 14” (356mm) custom arm length. effects devices Matte White* Matte Black* Polished Chrome Industrial Gray (Bead Blasted SS) Metallic Gray* Brushed Stainless Steel Architectural Bronze* Polished Oil-Rubbed Bronze Plate Matte Oil-Rubbed Bronze Plate AGL-2 Amber Glass Lens CGL-2 Clear Glass Lens FGL-2 Frosted Glass Lens (standard) HCL-2 Honeycomb Louver LSL-2 Linear Spread Lens SFL-2 Soft Focus Lens SGL-2 Spread Lens UVL-2 Ultra Violet Lens WTL-2 Warm Tone Lens AMEC End Cap ©2011 Lucifer Lighting Company As part of its policy of continuous research and product development, the company reserves the right to change or withdraw specifications without prior notice. 3750 IH35 North San Antonio, Texas 78219 [PH] +1-210-227-7329 [FAX] +1-210-227-4967

MOUNTING EDL-ZO ZERO-SIGHTLINE When installed according to manufacturer’s installation instructions and when ceiling conditions are met, the fitting is flush with the ceiling plane. Use EDL-M with EDL-ZO collar for a rapid, minimal plaster installation. (89mm ceiling cutout; Lucifer Lighting recommends that the edge of the ceiling cutout be beveled to ensure proper fit.) Use EDL-M with EDLA-APP-Z-RD appliqué for additional reinforcement against ceiling cracking and in installations which require finer finish out. (127mm ceiling cutout.) FLANGE OVERLAY Fitting overlays ceiling plane. Use...