2RE-AD
3Pages

2 SERIES HAL INTERNATIONAL 2RE-AD RECESSED HAL DOWNLIGHT FITTING ADJUSTABLE ROUND EXPANDED APERTURE Aimable 2.35” (60mm) aperture halogen fitting with hot-aim tilt up to 45° and 357° locking rotation. May be installed as flange overlay or flush zero-sightline. IP10 Dry / Damp and IP64 Wet location. ORDERING INFORMATION - DOWNLIGHT FITTING 2RE-AD 2 SERIES ROUND EXPANDED APERTURE ADJUSTABLE FLANGE COLOR WH White BK Black PR Primer AG Satin Silver AB Architectural Bronze IG Industrial Gray SS Brushed Stainless Steel CH Chrome PB Polished Oil-Rubbed Bronze Plate MB Matte Oil-Rubbed Bronze Plate CF Custom Finish 1 1 LAMP VOLTAGE LVH Low Voltage Halogen MVH Mains Voltage Halogen OPTIONAL CONFIGURATIONS Leave blank unless specifying optional configuration Linear Spread Lens 2 02 Honeycomb Louver 2 Clear Glass Lens 04 Soft Focus Lens Amber Glass Lens 07 Warm Tone Lens Frosted Soft Focus Lens 09 Ultra Violet Lens Spread Glass Lens 14 316 Marine-Grade 2, 3 No Lens Stainless Steel Faceplate 2 Frosted Linear Spread Lens Custom finishes assigned unique suffix upon receipt of order, consult factory for additional cost IP10 Dry / Damp location only LED MR-16 lamps only, compatible with 9W Soraa MR-16 LED’s ZERO-SIGHTLINE ROUTER TOOL GUIDE (IP10 Dry / Damp locations only) Recommended for Zero-Sightline installations in wood ceilings. ¨ DLA-RTG-2S-RD Tool, router guide; reusable APPLIQUÉ (IP10 Dry / Damp locations only) Required for Zero-Sightline installations in plaster ceilings. ¨ EDLA-APP-2S-RD-1 Standard 1/16” plaster profile ACCESSORIES ALTERNATE EFFECTS DEVICES ¨ LSL-2 Linear Spread Lens ¨ HCL-2 Honeycomb Louver ¨ CGL-2 Clear Glass Lens ¨ SFL-2 Soft Focus Lens Frosted Glass Lens Amber Glass Lens Warm Tone Lens Frosted Soft Focus Lens ¨ UVL-2 Ultra Violet Lens ¨ SGL-2 Spread Glass Lens ¨ FLSL-2 Frosted Linear Spread Lens TECHNICAL CONSTRUCTION Downlight Fitting: Steel and aluminum; Painted finishes are granulated powder coat. 304 corrosion resistant stainless steel faceplate for Wet location fittings. Fitting Adaptor: High impact composite and stainless steel. Appliqué: Zinc alloy. LAMP MR-16 halogen and LED; 12-volt GU5.3 base and line / mains GU10 base. Note: MR-16 LED lamps, other than 7.5W and 9W Soraa Brilliance and Vivid lamps, must be independently confirmed as compatible by the corresponding lamp manufacturer (9W requires no lens). Consult factory for assistance. DIMMING PROTOCOL Best achieved using a corresponding reverse phase control for electronic transformers and a forward phase control for magnetic transformers. Compatibility and performance may vary between controls and applied loads. LISTING cTUVus listed to UL1598 standard for IP10 Dry / Damp and IP64 Wet locations. CE marked. WARRANTY Manufacturer’s 1-year warranty, from the date of shipment by Seller, on all Lucifer Lighting provided system components. Consult website for full warranty terms and conditions. ©2018 Lucifer Lighting Company As part of its policy of continuous research and product development, the company reserves the right to change or withdraw specifications without prior notice.

DOWNLIGHT FITTING s ADJUSTABILITY Hot-aim adjustment from below up to 45° tilt and 357° rotation, faceplate conceals adjustment mechanisms. S BAFFLE Die-cast baffle minimizes aperture glare; black finish standard. S ADJUSTABLE YOKE Adjustable yoke allows for quick exchange of lamp and effects devices. Accommodates up to 2 effects devices. Stilt guide Allows for pre-aiming prior to insertion of fitting. S RETENTION Engineered integral ball plungers correspond to fitting adaptor ensuring snug fit against finished ceiling. S TRIM PLATE Removable faceplate provides access to adjustment...

2 SERIES HAL INTERNATIONAL 2RE-AD ZERO-SIGHTLINE INSTALLATIONS DIMENSIONS / DRAWINGS Zero-Sightline installations available for IP10 Dry / Damp location fittings only. When installed according to manufacturer’s instructions and ceiling conditions are met, fitting is flush with the ceiling plane. Consult 2-Series Installation Guidelines for appropriate ceiling cutouts and instructions for proper Zero-Sightline installations. I APPLIQUÉ For use in gypsum board ceiling applications. Not recommended for stucco applications. EDLA-APP-2S-RD-1 recommended for standard plaster installations and has...