Pinhole 90 Fixed
2Pages

Prospex® Pinhole 90 Fixed downlight for LED5090413-F-LED Recessed downlight for all Lucent LED50 modules and with 34mm diameter pinhole aperture with deep regressed lamp position for minimal glare. Can be installed into new plaster ceilings for trimless seamless appearance or into existing plaster or suspended ceilings with "shadow"gap Both fixed and accent versions available . 360° rotation and 45° adjustment on accent fixtures. IP44 versions available.Fixed version only Trims available with overlap flange for installation into existing ceilings (suffix "-9000-PBZ" to the reference number when specifing) and Plaster in kit for seamless flush finish (suffix "-9000-PCZ" to the reference number when specifing). Ref Number: 90413-F-LED-WHWhite (RAL 9010) 90413-F-LED-BK Black (RAL 9005) Lamp quantity Lamp Lamp holder Lamp wattage Adjustable Aperture Overall dimension Overall height Required depth First fix requirement* Ceiling cut out Ceiling thickness Ingress protection** Dimming options*** 34 92 Cut out 83mm Trimmed fixture with 9000-PBZ www.lucent-lighting.com ln 00 *First Fix requirement. A choice of two installation kits. Specify: 9000-PBZ for already finished ceilings. 9000-PCZ plaster in kit for seamless installation. **IP Rating. Tested from underside of the ceiling. For IP44 version add suffix "-IP" to the fixture reference number. ***Dimming. Whilst Lucent can offer the majority of its luminaires with various dimming options, it remains the responsibility of the specifier/installer to check and ensure compatibility of any control equipment used. Additional cabling may be required depending on the dimming protocol specified. it is the policy of Lucent Lighting to continually review and improve its products and therefore reserve the right to change any details of product or withdraw specifications without prior notice. Luminaires designed to comply with EN60598 and all other relevant Standards. This Specification Sheet supersedes all previous versions All intellectual property rights pertaining to the product described above and to this document are owned by or licensed to Lucent Lighting UK Ltd. We reserve our right to take whatever action is necessary to protect those intellectual property rights. Please notify Lucent Lighting Ltd of any inaccuracies immediately. E80E Cut out 83mm Trimless fixture with 9000-PCZ Europe China Russia Job/Project Name Area/Location Fitting Ref Quantity Contact Lucent Lighting: e: info@lucent-lighting.com t: +44 (0)20 8442 0880

Lucent LED50 Range Lucent's own range of 50mm diameter LED modules including the LED50 >80CRI and LED50-PLUS >90CRI, LED50-SEVEN, LED50-Ambiance Warm Dim, all utilising Cree XP-E2 white LED's, and LED50-ONE based on Citizen COB technology. Please refer to luminaire Specification sheet for maximum lumen output that can be used within the fixture. LED50 module, RA > 80CRI using 9 x Cree XP-E2 LEDs A choice of 3 colour temperatures 2700/3000/4000K & 3 Optic angles 18/22/36°. Max Drive current 500mA, can be under run if required. Dimmable with correct driver type. For dimming protocols...