Pinhole 60 Accent
2Pages

Prospex®Pinhole 60 Accent downlight for LED3560413-A-LED A range of miniature downlights for Lucent LED35 module with a small diameter 'pinhole' aperture with deep regressed lamp position for minimal glare. Can be installed into new plaster ceilings for trimless seamless appearance or into existing plaster or suspended ceilings with "shadow"gap. Both fixed and accent versions available. 360° rotation and up to 30° adjustment on accent fixtures. Trims available with overlap flange for installation into existing ceilings (suffix "-6000-PBZ" to the reference number when specifing) and Plaster in kit for seamless flush finish (suffix "-6000-PCZ" to the reference number when specifing). Lamp quantity Lamp Lamp holder Lamp wattage Adjustable Aperture Overall dimension Overall height Required depth First fix requirement* Ceiling cut out Ceiling thickness Ingress protection** Dimming options*** Cut out 60mm Trimmed fixture with 6000-PBZ www.lucent-lighting.com Cut out 60mm Trimless fixture with 6000-PCZ *First Fix requirement. A choice of two instaiiation kits. Specify: 6000-PBZ for already finished ceilings. 6000-PCZ plaster in kit for seamless installation. **IP Rating. Tested from underside of the ceiling. ***Dimming. Whilst Lucent can offer the majority of its luminaires with various dimming options, it remains the responsibility of the specifier/installer to check and ensure compatibility of any control equipment used. Additional cabling may be required depending on the dimming protocol specified. Dimensions of drivers may prevent installation through the installation kit. check dimensions prior wiring/installation. it is the policy of Lucent Lighting to continually review and improve its products and therefore reserve the right to change any details of product or withdraw specifications without prior notice. Luminaires designed to comply with EN60598 and all other relevant Standards. This Specification Sheet supersedes all previous versions All intellectual property rights pertaining to the product described above and to this document are owned by or licensed to Lucent Lighting UK Ltd. We reserve our right to take whatever action is necessary to protect those intellectual property rights. Please notify Lucent Lighting Ltd of any inaccuracies immediately. E&OE C€<§>© Europe China Russia Job/Project Name Area/Location Fitting Ref Contact Lucent Lighting: e: info@lucent-lighting.com t: +44 (0)20 8442 0880

Lucent LED35 GEN2 Lucent's 35mm diameter LED modules designed to offer an alternative for MR11 lamps. Please refer to the LED Module's specification sheet for full product details LED35 GEN2 Module LED35/2 module, RA > 90CRI using 4 x Luxeon Rebel ES LEDs A choice of 3 colour temperatures 2700/3000/4000K & 3 Optic angles 15°/24°/36°. Max Drive current 350mA. Dimmable with correct driver type. For dimming protocols available please consult Lucent Lighting. * Separate die cast plaster in kit for plaster ceilings. ** Tested from ceiling underside. To specify IP54; add '-IP' to end of code. It...