Lucent LED50 Ambiance WarmDim
1Pages

Prospex® LED50 Ambiance WarmDim LED50WD-xx-xx 50mm diameter LED module with colour adjustment from 3000K or 2700K down to 2200K to match tungsten lighting. For use in all ProSpex and ProSpex Plus LED luminaires. Drive Current 700mA. Dimmable with the correct driver type, with a Constant Current Reduction output. Weight **g Colour options CRI Beam options Drive Current Module Wattage* Voltage Dimming options** Temperature range measured lumens, buy colour temperature and driver current Issue Date: April 2016 Diagram ilustraling how theAminance Warn dim module warns up in colour compared to on Mli Didirok limp. LED50 Ambiance WarmDim Order Code Optic Angle www.lucent-lighting.com Module Type LED50WD *Module wattage. The figure quoted as module wattage is based on the drive current and the modules voltage. The figure quoted on the measured lumens table above allows for losses from a driver. This figure may change depending on the specific driver used. **Dimming. Whilst Lucent can offer the majority of its luminaires with various dimming options, it remains the responsibility of the specifier/installer to check and ensure compatibility of any control equipment used. Additional cabling may be required depending on the dimming protocol specified. LEDs. In respect of Lucent LED Products, whilst reasonable endeavours will be taken to match the light quality, LED bin and/or colour temperature of the LED’ used for any Replacements/additions, it may not always be possible to do so, due to the age of the product, changes in the LED suppliers product specification and availability. For any particular batch of LED modules, Lucent supply LED's from a single 16th ANSI bin, which is less than a 2-step MacAdam ellipse (full output colour only). Modules. Lucent ProSpex LED modules are manufactured in accordance with EN 60231. It is the policy of Lucent Lighting to continually review and improve its products and therefore reserve the right to change any details of product or withdraw specifications without prior notice. Luminaires designed to comply with EN60598 and all other relevant Standards. This Specification Sheet supersedes all previous versions All intellectual property rights pertaining to the product described above and to this document are owned by or licensed to Lucent Lighting UK Ltd. We reserve our right to take whatever action is necessary to protect those intellectual property rights. Please notify Lucent Lighting Ltd of any inaccuracies immediately. ESOE C €<§><© Europe China Russia Job/Project Name Area/Location Fitting Ref Quantity Contact Lucent Lighting: e: info@lucent-lighting.com t: +44 (0)20 8442 0880