Lucent LED35 GEN2 Module
1Pages

35mm diameter LED module specifically designed to offer an MR11 LED option to the Lucent range of LED modules. Max drive Current 350mA. Dimmable with the correct driver type. • Height - 60mm • Overall Diameter - 035mm • Weight - 40g • 2700/3000/4000 Colour temperature as standard • >90CRI • 15°, 24° and 36° beam options available • Max drive current is 350mA • Dimming option - Phase, 0-10V and DALI • For use in the following ProSpex downlights: Pinhole 60 Square 60 Edge Soft 50 Soft Square 50 Focus 70 Prospex 70 Issue Date: October 2016 Module Type LED35 ▼ ▼ | Example LED35- 30- 36 *Module wattage. The figure quoted as module wattage is based on the drive current and the modules voltage. The figure quoted on the measured lumens table above allows for losses from a driver. This figure may change depending on the specific driver used. ‘‘Dimming. Whilst Lucent can offer the majority of its luminaires with various dimming options, it remains the responsibility of the specifier/installer to check and ensure compatibility of any control equipment used. Additional cabling may be required depending on the dimming protocol specified. LEDs. In respect of Lucent LED Products, whilst reasonable endeavours will be taken to match the light quality, LED bin and/or colour temperature of the LED’ used for any Replacements/additions, it may not always be possible to do so, due to the age of the product, changes in the LED suppliers product specification and availability. For any particular batch of LED modules, Lucent supply LED's from a single 16th ANSI bin, which is less than a 2-step MacAdam ellipse. Modules. Lucent ProSpex LED modules are manufactured in accordance with EN 60231. It is the policy of Lucent Lighting to continually review and Improve its products and therefore reserve the right to change any details of product or withdraw specifications without prior notice. Luminaires designed to comply with EN60598 and all other relevant Standards. This Specification Sheet supersedes all previous versions All intellectual property rights pertaining to the product described above and to this document are owned by or licensed to Lucent Lighting UK Ltd. We reserve our right to take whatever action is necessary to protect those intellectual property rights. Please notify Lucent Lighting Ltd of any inaccuracies immediately. E&OE Job/Project Name Area/Location Fitting Ref Quantity Contact Lucent Lighting: e: info@lucent-lighting.com t: +4